I am running the latest version of WSJT-X and JTAlert. I have QRZ.com set up as my online XML Lookup on JTAlert. I have a paid/active XML subscription with QRZ.com. JTAlert runs properly and shows

All is working now after making the windows sound playback default Line 1. Line 3 (media player/internet tty stream/fldigi working. Another media player (VLC) playing an mp3 thru the system, not VAC,

try replacing the usb cable Dave Garber VE3WEJ / VE3IE

Hi Bill. I am using USB from the rig to my computer. It controls everything. I have been running this configuration for months. It happened suddenly. I tried all other bands, antennas, less than

try power on 100 % w6ino W6INO ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Twenty years from now, you will be more disappointed by the things you didn't do than by the ones you did do. So, throw off the bowlines.

On Mon, Feb 24, 2020 at 11:32 PM, John H. Long Jr. wrote: You will get to recognize the pattern. #1 The pileup is all above 1000 hz (All calling the DX station and giving their Grid

Hi George, After rebooting my Win 8.1 computer, this is what wsjt-x looks like. for some reason Line 1 is not seeing what it should. Line 3 is from media player to fldigi. both line 1 and line 2

On Mon, Feb 24, 2020 at 1:41 PM Augustine Brace via Groups.Io <aug1021hunt@...> wrote:

Hi George, Thanks for your reply. I have enclosed a screenshot of my VAC setup. Line 1 is the one in question. I lived in Stephens City (just south of winchester) for 31 years. Been here in central

Hi Steve, how is your PC and rig connected for audio, PTT, and CAT? The error message is saying that the audio connection has been broken, if that is USB audio then RFI is very likely to be the

If you are using the current version of HRD, it is supposed to be fixed in the next update of HRD.-- 73, Kevin Potter k5vp

You will get to recognize the pattern. #1 The pileup is all above 1000 hz (All calling the DX station and giving their Grid location). #2 The DX station is only answering below 1000 hz with the

This is what keeps happening On Mon, Feb 24, 2020 at 9:56 AM Philip Rose via Groups.Io <pvrose@...> wrote:

Anyone know how to get WSJT-X to log to HRD as FT-4? When the lotg pop-up comes up it has FT-4 as the mode. When it gets to HRD, it is MFSK. I don't see this problem for FT-8 of course. -- 73, Wayne,

Suddenly, after months of operating with no issues, this morning, my TS-890S refuses to unkey after a transmission is made on FT-8. The tone stops but the rig is keyed and it will only unkey if I

More correctly, FOX mode cannot be used on standard frequencies. We Hounds can still screw up and try Hound mode on standard frequencies. We'll copy everyone, but since the Fox can't operate there, it

It’s straight to the computer sound. Do you think my signal report of PSK reporter is average.

TX/RX turnaround time should be as short as you can make it. You want your receiver to be connected back to the antenna and fully recovered (frequency setting, muting, squelch, AGC, etc.) before the

WSJT-X is coded so that F/H (DXpedition Mode) cannot be used on "standard" FT8 frequencies. Major DXpeditions like this one are almost certain to be using WSJT-X as intended, and their websites will

I've offered similar advice for years -- mine is for slow AGC and setting the "thermometer" to the highest value that doesn't make it trun red with the strongest signals present. The green bar is