Hi Rick, if you Linux distribution does not have prerequisite packages at the required versions for the pre-built WSJT-X package then all you need do is build from sources. It's not very difficult,

I want to unsubscribe as too many mails are arriving. 73 de Göran SM5FNB Skickat från min Samsung Galaxy-smartphone.

When I try to install, it fails requiring libgfortran3

Steve, I don't have an answer for you, but I can tell you that a friend of mine is seeing the same thing on his Mac with his 7300 and 9700. His name is also Steve, so maybe it's a bug with ops named

William - Thank you for answering my question. I will add another 'monitor' and try your suggestions. 73 to all. Dick/w7wkr

Gents, Many thanks for your kind replies regarding this problem. I think Marion K4GOK may have the solution. I must confess I had not considered the Norton security software suite but that would

Gents, Many thanks for your kind replies regarding this problem. I think Marion K4GOK may have the solution. I must confess I had not considered the Norton security software suite but that

Yes. Didn't see any need for that component.

while rebooting it uses the audio portion of the sound card and activates if it is on and usually here this but also check you atu it might be trying to adjust if the laptop keys the mic when booting

See +++ below Sent from Mail for Windows 10

See +++ Sent from Mail for Windows 10

Lee, As Bill says, if you turn off CAT control in Rumlog, and all is set correctly, when you complete an FT8 contact and save it, the frequency and details of the contact will be sent to Rumlog. I

I have both the IC-7300 and IC-9700 working with MacLoggerDX and WSJT-X. The odd thing is I have to unplug the IC-7300 USB cable in order to route audio to and from the IC-9700. Switching audio

William, If you are not using Split Operation under the radio tab (fake it or rig) and are close to the rigs filter edges this will happen. You need to stay between 500-2500 on the waterfall in this

I reboot my old laptop when that happens. I hear a set of clicks when listening to my signal. Happens after 4-5 hours of the app running regardless if the radio is on or not.

Has anyone been able to install wsjtx_2.1.2_amd64.deb on Debian Buster? If so, where did you find libgfortran3?

Gents, Many thanks for your kind replies regarding this problem. I think Marion K4GOK may have the solution. I must confess I had not considered the Norton security software suite but that

Might be worth double checking that you still have the right audio device selected in WSJT-X settings.

I have an ANAN-8000DLE and presently have WSJT-X and FLDIGI set up to work without rig control and I use one program at a time so I am using the same virtual audio cables pairs for both programs and

Bill, With use of my Apple MacBook Pro, you stated that I only have use of one serial port. Could I use either a USB switch or hub, thus increasing the shared potential for both WSJT & RumLogNG to