It was known (and acknowledged) from the beginning that .080 was RTTY segment and would be wiped out during RTTY contest weekends. Gary - AG0N

Wise retrospect!

Hello, Bill, Thank you for your post. I suggest 14080 for FT4, many stations appear to use it. I listen on the advised FT4 frequency and hear very little. You are certainly not too old for this group!

I guess I am too old for this group. 14075 for as long as I have been a ham was the calling frequency for RTTY. But every CW contest had the CW contesters all the way up to and over 14100. Those with

I am having trouble getting my 7600 and WSJT-X work together. Would anyone be willing to share with me your 7600 settings when using WSJT-X?

After a clean install and reboot, it ran for 45 min or so. Then see the attached: Or if you can't see attachment, I'll just copy and paste it. Hasan, N0AN

After the one upgrade it set my custom power setting to shut down instead of just screen save. One of my USB ports reverted to going to sleep as well. So recheck all the USB and power settings. Jim

Done, and running without errors so far. One anomaly: When I pin the program to the taskbar , or copy a link out on to the desktop, the icon is a white square, not the nice looking WSJT-X Icon. I

Thanks Bill, will do now and report back. Hasan

Hi Hasan, I can't think of any obvious reason why having installed a diagnostic version should now effect running the stock version of WSJT-X. All I can suggest is to do a clean

From a pinned icon on my taskbar. Now when I look in the Start menu, I only see "uninstall" for 2.1.1 and 2.1.2 , no actual program 73, N0AN Hasan

On 09/02/2020 11:31, Hasan Schiers N0AN wrote: Hi Hasan, how are you starting WSJT-X? 73 Bill G4WJS.

Working with Bill, G4WJS, on a DXLabSuite error, I had loaded the trace version and after we finished (and found the problem in cooperating programs,not a bug), I installed 2.1.2 over the top of the

This is actually normal for the Butternut due to the construction of the 15M stub. It's practically impossible to keep that wire from flopping a bit in the wind. I saw a note some years ago from a ham

In addition to other suggestions, make sure you have no DSP involved in your transmit signal Andy K3UK

I realized I’m having the same issue. New windows 10 installation. Fairly mid range PC with AMD 3600 based build. After the PC goes to screen saver I need to restart WsjTx to get the program to

But good amateur manners would imply they shouldn’t.....still, you will find lids everywhere these days. D.

Hi Mike, It's just not going to happen. Whenever a contest occurs the devotees come out of the woodwork and the bands are over crowded. In the case of the RTTY guys their signals are wider and the

I have had two experiences with power fluctuations (ICOM 7610). One was transmitting on the edge of the transmit audio filter. I fixed that by selecting split. This moved my transmit to the center

RTTY have regularly used 14.808-14.125 for contests for the last 30 years ... sometimes even below 14.080. 14.080 "listening up" has been standard for RTTY DXpeditions for nearly as long. The choice