|
locked
Re: No decode on 40 meters
Yes— first thing I checked!
Sid NZ7M
Sent from my iPhone
Yes— first thing I checked!
Sid NZ7M
Sent from my iPhone
|
By
Sid Frissell
·
#5001
·
|
|
locked
Re: No decode on 40 meters
Are the correct frequencies entered into WSJT-X?
Chuck W5PR
Are the correct frequencies entered into WSJT-X?
Chuck W5PR
|
By
Chuck Dietz
·
#5000
·
|
|
locked
No decode on 40 meters
Strange deal! Everything works fine on all bands except 40. I can hear signals on K3s, and panadapter shows them. Can see signals on the WSJT-X waterfall but nothing decodes or appears on either
Strange deal! Everything works fine on all bands except 40. I can hear signals on K3s, and panadapter shows them. Can see signals on the WSJT-X waterfall but nothing decodes or appears on either
|
By
Sid Frissell
·
#4999
·
|
|
locked
Re: WSJTX, JTAlertX, and ACLog
the way I used to do it , I used a software called lpb2 it is a virtual com port creator, and you set up on your regular com port, and each port is created, as needed to emulate another port, but it
the way I used to do it , I used a software called lpb2 it is a virtual com port creator, and you set up on your regular com port, and each port is created, as needed to emulate another port, but it
|
By
Dave Garber <ve3wej@...>
·
#4998
·
|
|
locked
Re: Rx level bar of bottom right on WSJT-X disappeared.
Bill. Thank you for your advice. I checked Microphone in Privacy of Setting. I found WSJT-X icon in Microphone list. The icon is active. But, I can not see moving RX level bar. Please advice for
Bill. Thank you for your advice. I checked Microphone in Privacy of Setting. I found WSJT-X icon in Microphone list. The icon is active. But, I can not see moving RX level bar. Please advice for
|
By
jh7iqq@...
·
#4997
·
|
|
locked
Re: Upgrade to latest release and now have sound issues
Thanks, that got it right.
Bill
K2WH
Thanks, that got it right.
Bill
K2WH
|
By
Bill <k2wh@...>
·
#4996
·
|
|
locked
Re: Upgrade to latest release and now have sound issues
JTAlert uses your default sound card. That likely means all of your Windows beeps are going out to your transmitter as well. Go into your Windows Sound Settings and change default back to your PC's
JTAlert uses your default sound card. That likely means all of your Windows beeps are going out to your transmitter as well. Go into your Windows Sound Settings and change default back to your PC's
|
By
Jim Bacher - WB8VSU
·
#4995
·
|
|
locked
Upgrade to latest release and now have sound issues
In an attempt to solve my "B4" issue, I upgraded to the latest version 2.15.5 and now I get this msg.
OK, how do I fix this ? I'm using win7.
Bill
K2WH
In an attempt to solve my "B4" issue, I upgraded to the latest version 2.15.5 and now I get this msg.
OK, how do I fix this ? I'm using win7.
Bill
K2WH
|
By
Bill <k2wh@...>
·
#4994
·
|
|
locked
Re: WSJT and Icom 7610
Hi Eli,
you need to reduce the AF Output Level" for the USB audio in the rig's SET menu "SET->Connectors->USB AF/IF Output->AF Output Level". Aim to get 30dB or a little higher on the WSJT-X
Hi Eli,
you need to reduce the AF Output Level" for the USB audio in the rig's SET menu "SET->Connectors->USB AF/IF Output->AF Output Level". Aim to get 30dB or a little higher on the WSJT-X
|
By
Bill Somerville
·
#4993
·
|
|
locked
WSJT and Icom 7610
Note: I'm new to the 7610 but pretty well versed on WSJT and the K3
Here’s my problem
In order to keep the WSJT receive level in the 30-40 range, I have to reduce the=
7610 gain to the point where
Note: I'm new to the 7610 but pretty well versed on WSJT and the K3
Here’s my problem
In order to keep the WSJT receive level in the 30-40 range, I have to reduce the=
7610 gain to the point where
|
By
eam1212003
·
#4992
·
|
|
locked
Re: WSJTX, JTAlertX, and ACLog
Radio: Kenwoond TS-2000X, interface: RigBlaster Advantage.
David
On Wednesday, December 18, 2019, 1:00:27 PM EST,
Radio: Kenwoond TS-2000X, interface: RigBlaster Advantage.
David
On Wednesday, December 18, 2019, 1:00:27 PM EST,
|
By
David AD4TJ
·
#4991
·
|
|
locked
Re: Lost My "B4" Notification
I'll try to reload and see if that works.
Another strange issue is that while I have lost the "B4" msg, I now get some of the calls underlined in JTAlertX ?????
Maybe a reload is what is needed.
I am
I'll try to reload and see if that works.
Another strange issue is that while I have lost the "B4" msg, I now get some of the calls underlined in JTAlertX ?????
Maybe a reload is what is needed.
I am
|
By
Bill <k2wh@...>
·
#4990
·
|
|
locked
Re: Lost My "B4" Notification
Then you may have to reload the JTALERTX software. You might go back to them and see if they have any other ideas.
73
Greg
KG5RJ
Then you may have to reload the JTALERTX software. You might go back to them and see if they have any other ideas.
73
Greg
KG5RJ
|
By
KG5RJ <kg5rj@...>
·
#4989
·
|
|
locked
Re: Lost My "B4" Notification
Tried that and it still doesn't display the "B4"
I went into "Manage Settings", selected the "B4" line item..
I selected a date back about 2 years and clicked both the "Remove Spaces" and "Ignore B4
Tried that and it still doesn't display the "B4"
I went into "Manage Settings", selected the "B4" line item..
I selected a date back about 2 years and clicked both the "Remove Spaces" and "Ignore B4
|
By
Bill <k2wh@...>
·
#4988
·
|
|
locked
Re: WSJTX, JTAlertX, and ACLog
one way is to start ACL manually
what rig are you connecting to
Dave Garber
VE3WEJ / VE3IE
one way is to start ACL manually
what rig are you connecting to
Dave Garber
VE3WEJ / VE3IE
|
By
Dave Garber <ve3wej@...>
·
#4987
·
|
|
locked
Re: Lost My "B4" Notification
Go into setting JTALERTX and click on the Manage Settings item. When the menu comes up you'll see Worked B4 about half way down the menu. Select it and you'll be able to turn it on and set a before
Go into setting JTALERTX and click on the Manage Settings item. When the menu comes up you'll see Worked B4 about half way down the menu. Select it and you'll be able to turn it on and set a before
|
By
KG5RJ <kg5rj@...>
·
#4986
·
|
|
locked
Timing of end of audio signal generation and PTT release?
On 2M I use a Flex 6700 driving a BEKO HLV1000-LDP SSPA from the Flex XVTR port. I used one of the Flex TX outputs to drive PTT into the Amp. In the Flex config I’ve added a delay of 60msec
On 2M I use a Flex 6700 driving a BEKO HLV1000-LDP SSPA from the Flex XVTR port. I used one of the Flex TX outputs to drive PTT into the Amp. In the Flex config I’ve added a delay of 60msec
|
By
Pat Patterson
·
#4985
·
|
|
locked
Re: FT4 Freqs?
Paul... TNX for the info. ...73, Bob K8BL
On Wednesday, December 18, 2019, 11:08:32 AM EST,
Paul... TNX for the info. ...73, Bob K8BL
On Wednesday, December 18, 2019, 11:08:32 AM EST,
|
By
K8BL BOB LIDDY <k8bl@...>
·
#4984
·
|
|
locked
Re: FT4 Freqs?
Hi All
Just an example, France is only allowed 1810-1850... and lots of countries cannot go this high (1900)
73
Paul F6EXV
Hi All
Just an example, France is only allowed 1810-1850... and lots of countries cannot go this high (1900)
73
Paul F6EXV
|
By
Paul F6EXV <f6exv@...>
·
#4983
·
|
|
locked
Re: FT4 Freqs?
Anthony,
I don't agree that the FT8 Freq on 160M should have been made 1840 since
it is too close to where most of the activity on CW/SSB occurs. There seems
to be a vast wasteland above 1900 that
Anthony,
I don't agree that the FT8 Freq on 160M should have been made 1840 since
it is too close to where most of the activity on CW/SSB occurs. There seems
to be a vast wasteland above 1900 that
|
By
K8BL BOB LIDDY <k8bl@...>
·
#4982
·
|