Thanks for that tip, Phil. That would make it much clearer as to which device is which, especially since I have the computer's on-board audio card, a USB audio card connected to my 706MkIIG and the

Thanks Kai, I was hoping that was the ticket...it sounded promising. Unfortunately, it didn't change the behavior I'm observing. I went into the "Sound" Control Panel (the dialog with the Playback,

Hi Kari. Retired eh, lucky you!. As you've probably seen, It's largely sorted now, thanks to Bill's and your comments together.  Joining the dots etc. Re Python on Windows. If needed, it's an

UPDATE; A router update was available; Installing the update corrected the problem..

Not to mention that multi-megabyte attachments can suck up a user's bandwidth and message quickly. I'm in one group that was bouncing around a 26 megabyte attachment this week. Along with the others

Anybody out there with a TS-2000 that's willing to some testing with hamlib? I need to know what the TS-2000 is returning for the IF; command for the RIT setting. Can be done simply with rigctl-wsjtx

too much detail is always better than not enough ! those who think it is too much detail will be back here asking for step by step instructions very quickly. w2jc

Hi Mike, this list is server by the Groups.io platform, storage for messages and attachments is limited unless a paid subscript is bought. This list functions very well within the free of charge

Neal: A couple of years ago I decided I wanted to move the WSJT-X default directory of C:\Users\<username>\AppData\Local\WSJT-X onto the E: drive on my PC (32-bit Win 7 Pro), which is where the WSJT-X

Thank you all for your help. -Mike

And that's problem why please?

OK. What I ended up doing. Outside of WSJTx, when it was not running, I made two copies of the "main" .ini, the "normal" one with three "configurations" within it. I renamed each copies as I

I bought the ic-7300 user guide, and the author suggested I rename the audio connections from USB Audio Codec to IC-7300 input and output. That way makes it easier to track your audio connections,

Hi Matt, Set the default Windows audio device to the Windows internal audio system, what ever that is. All Windows bleeps, chrips and audio will go to the default audio device. Then

I'm confused about something related to the audio devices used by WSJT-X on Windows 10 with my IC-7300 (USB connection). Everything works fine as long as I have the "USB Audio Codec" selected as the

On 1.4.2020 13.27, Bill Somerville wrote: Hi Bill & Dave,Bill, I agree in that replacing a few mouse-clicks with a separate program is not worth the effort. In fact, such a program

Hi Neal. Remotely accessing the main computer is the simplest solution. TeamViewer, AnyDesk and Aeroadmin all have a free version for personal use. 73. Carl - WC4H

Hi. For sound-card problems immediately after a windows update. It would be wise to re-check the privacy settings for the microphone and other devices. Also, check just "how" Windows enumerated

Dave, the only significant entries in the settings file that need adjusting after copying the .INI file to a new --rig-name setup are a couple of directory paths, and they are reachable from the

OK Kari. As you seem to have much more free time than I do at the moment, and possibly deeper knowledge about it all, I'm formally handing you the baton to figure out how to reliably export all of a