Jeff WSJT-X updates an adi file for all QSO’s - it is in …AppData/Local/WSJT-X/ - it is this file the ‘Rescan’ option looks at - WSJT knows NOTHING about any logger adi files - the rescan

Thanks Dave. What I don't understand though is this: in WSJT-X Settings/colours there is a 'Rescan ADIF Log' box but how does it know the location of the log and how do I know it is actually being

Ted - did your Windows 'update'? (Never update Windows!) Win10 updates have a nasty habit of screwing up your audio mixer & your codec settings! Recheck those & TURN OFF Win10 update; by going into

>Not much information there. WSJT-X 2.1 Guide: Hi, A bit more information is available at 12.1. AP Decoding 73, Reino oh3mA

I've been using the software on FT8 with a Tigertronics SignalLink, but suddenly a few days ago it has gone deaf. Nothing appears in Band Activity, and the Receiving nomograph stays at zero, which is

Hi All, Personally, I'd say it's the QSO start time, and by start time, I wouldn't say when you start transmitting, it's the first response back from the intended station... I.E. CQ CQ CQ de

Not much information there. WSJT-X 2.1 Guide:

Hi, Roger. Here are the settings I have been using for my FT-991A: 31 Enhances CAT Rate 38400 54 CW Out Level 20 - 60 PC Keying DTR 62 Data Mode Others 64

The AG and AE are temporary until the FCC gets the paper work and shows the new license status. These all the ham to operate outside their “licensed” band areas pending the official upgrade in

In the US, when a technician class licensee upgrades to General, their call is followed by /AG and if an Extra Class /AE . I believe that is how the call would be entered in WSJT-X. How does WSJT-X

Exactly the time I log also. Gary - AG0N

Personally, I'd say it's the QSO start time, and by start time, I wouldn't say when you start transmitting, it's the first response back from the intended station... I.E. CQ CQ CQ de AG0NY CQ CQ CQ

Roger, I have been running WSJT-X with my FT-991A quite successfully. My memory is are used the following document to set up both radio and WSJT Dash X and it worked out quite

It's in the User Guide. Have you studied it? 73, Jim K9YC

What is "Enable AP"? I've never turned it on. 73, Herb WB8ASI

I'm having trouble getting my FT-991a to work correctly with WSJTX. It will receive fine but I can't get it to send; at least I don't think it is.  When I try to send the CQ WV8VRC the power meter

If there was any significant incidence of LoTW users submitting QSOs with "end times" instead of "start times" and as a result not getting confirmations, we'd have heard about it years ago. I don't

I check several QSO loggings between ACLOG and LOTW and it appears that the time recorded is the QSO start time :) On 3/24/2020 4:40 PM, Lance Collister, W7GJ wrote:

I have seen good level signals that just miss a decode cycle. I have learned to watch the density of the waterfall for insight into decodes. Last night I put 3 receivers of my Flex 6600 on 40 m with

Hi John, tnx fer input. I will try again to see if this works. I have taken a break away from system to see if I can fix my problem without doing a revert. I am hoping a fresh run at the problem