I bought the ic-7300 user guide, and the author suggested I rename the audio connections from USB Audio Codec to IC-7300 input and output. That way makes it easier to track your audio connections,

Hi Matt, Set the default Windows audio device to the Windows internal audio system, what ever that is. All Windows bleeps, chrips and audio will go to the default audio device. Then

I'm confused about something related to the audio devices used by WSJT-X on Windows 10 with my IC-7300 (USB connection). Everything works fine as long as I have the "USB Audio Codec" selected as the

On 1.4.2020 13.27, Bill Somerville wrote: Hi Bill & Dave,Bill, I agree in that replacing a few mouse-clicks with a separate program is not worth the effort. In fact, such a program

Hi Neal. Remotely accessing the main computer is the simplest solution. TeamViewer, AnyDesk and Aeroadmin all have a free version for personal use. 73. Carl - WC4H

Hi. For sound-card problems immediately after a windows update. It would be wise to re-check the privacy settings for the microphone and other devices. Also, check just "how" Windows enumerated

Dave, the only significant entries in the settings file that need adjusting after copying the .INI file to a new --rig-name setup are a couple of directory paths, and they are reachable from the

OK Kari. As you seem to have much more free time than I do at the moment, and possibly deeper knowledge about it all, I'm formally handing you the baton to figure out how to reliably export all of a

Oh No!!!!!!

Neal, I do this and for the same reasons. Operating position is upstairs, the radio and controlling computer is in the conservatory. Too hot in summer, too cold in winter. You control WSJT on the

Why don't you just use a VNC? ------------------------------------------------------------------------------ President and CTO - Arcom Controllers Makers of repeater controllers and

Uhhh...dunno what happened, but the next time I checked, it is decoding beautifully. Now I must figure out what I did that made it stop transmitting! At that point, I decided I needed a break, too

I deleted the ini file, re-installed and re-configured, re-following the SignalLink support. NOW that window responding to sound is very active. But after the changes I am still unable to decode

YES ... every Elecraft rig, from the K2 on , should be setup the same way. Follow the directions here: http://www.w3fpr.com/Data_setup.htm I've followed Don's setup

I don't use the WSJT-X log as my primary log. I use a separate logging program, the log itself stays on Dropbox, and I can access it anywhere I have an internet connection. I then use

Windows 10 -> PC Settings -> Privacy -> Microphone Make sure both "Allow apps to access your microphone" and "Allow desktop apps to access your microphone" are *ON* 73, ... Joe, W4TV

Seems like a major Win 10 update will reorganize your com port assignments. Check these ...... On Tuesday, March 31, 2020, 7:34:07 PM CDT,

Is that power hunting feature also true of a KX3? I seem to have better luck ignoring ALC, setting KX3 PWR control to max, then managing audio to keep RF meter peaks to 50-75% of that PWR setting. It

That's not a screencap, that's a 3.3MB 4160X2080 cell phone picture. A screencap would have been less than 10% of the size of this inbox-buster and would have been more legible. Seriously, this is not

Monty, I think it means that your TV is stuck on the Lawrence Welk channel. Steve KS3K