Oh No!!!!!!

Neal, I do this and for the same reasons. Operating position is upstairs, the radio and controlling computer is in the conservatory. Too hot in summer, too cold in winter. You control WSJT on the

Why don't you just use a VNC? ------------------------------------------------------------------------------ President and CTO - Arcom Controllers Makers of repeater controllers and

Uhhh...dunno what happened, but the next time I checked, it is decoding beautifully. Now I must figure out what I did that made it stop transmitting! At that point, I decided I needed a break, too

I deleted the ini file, re-installed and re-configured, re-following the SignalLink support. NOW that window responding to sound is very active. But after the changes I am still unable to decode

YES ... every Elecraft rig, from the K2 on , should be setup the same way. Follow the directions here: http://www.w3fpr.com/Data_setup.htm I've followed Don's setup

I don't use the WSJT-X log as my primary log. I use a separate logging program, the log itself stays on Dropbox, and I can access it anywhere I have an internet connection. I then use

Windows 10 -> PC Settings -> Privacy -> Microphone Make sure both "Allow apps to access your microphone" and "Allow desktop apps to access your microphone" are *ON* 73, ... Joe, W4TV

Seems like a major Win 10 update will reorganize your com port assignments. Check these ...... On Tuesday, March 31, 2020, 7:34:07 PM CDT,

Is that power hunting feature also true of a KX3? I seem to have better luck ignoring ALC, setting KX3 PWR control to max, then managing audio to keep RF meter peaks to 50-75% of that PWR setting. It

That's not a screencap, that's a 3.3MB 4160X2080 cell phone picture. A screencap would have been less than 10% of the size of this inbox-buster and would have been more legible. Seriously, this is not

Monty, I think it means that your TV is stuck on the Lawrence Welk channel. Steve KS3K

Yes, same thing happened to me two days ago. I don't have a good solution, but I uninstalled WSJT and reinstalled it several times before it started working again. I also fumbled with all of the

Hello, My Win10 pc recently had a major update and every time this happens WSJT-X stops working. Something with the sound card quits working. I usually have to do a restore and go backwards to undo

I want two have the log directory on network attached storage (NAS), essentially a different mapped drive letter. The reason is that I want to have a second computer and operating position. I would

A more likely cause is mis-adjusted audio levels. The K3's power control does not work the same way as in radios from most other manufacturers. The audio level into the rig must be set so that the

I think it's the K3 adjusting. A guess is that it is trying to save the finals and just in case the SWR is too high. So it drops back and gradually brings up the power. I have seen it with

Hi Brian, It seems your date and transmit time fields are displayed in Arabic numerals. The other record time fields are all "000000", and the clock is in normal numerals. There seems to be two,

It's not a font problem. There is some sort of code corruption or possibly memory problem. I'd reload WSJTX first and see if that helps. If not, then restore the most recent backup of your

Hasan, Thank you for your feedback. I changed the font to your recommendation “Consolas Bold” but it did not fix the unreadable text boxes. In the past I have tried several fonts with the same