main@WSJTX.groups.io

Hamlin error: timing out

I’m trying to set up my IC-7700 for ft8 and it was working but windows just updated. I now get an error when trying to connect to the radio. It says Hamlib error: communication timed out while

By n4agl@... · #9297 ·

Re: High CPU useage on MSK144

Thanks.fot the information about the decode menu Bill. I will try that when I get home. I think my biggest problem is my laptop.Its a Lenovo and they have lots of background processes that can't be

By Wayne Newport · #9296 ·

Re: Two separate WJST programs on one computer

Thanks Frank that link was interesting reading

By Wayne Newport · #9295 ·

Re: fake it split suddenly stopped working

found the problem...hardware issue...odd problem with the keyboard...replaced now OK...and it IS Caps Lock that changes RX freq that certainly was odd Thanks to all John AB8O

By John Wiener · #9294 ·

Re: Windows too smart

The subject-line was too good to pass up relative to my latest Win10 experience the other evening. I fired up my ham-radio computer and just happened to watch the start-up sequence this time.

By Jerome Sodus · #9293 ·

Re: ALL.TXT?

I'll give you a link to it on my Google drive. It's a dos program that analyzes all.txt for signal strength sent and received by mode and band. Tells you if you are hearing better than being heard.

By Hasan Schiers N0AN · #9292 ·

Re: Windows too smart

If your radio audio is the only audio input it becomes the default. When you plugged in the mic for zoom that became the default audio sauce. Windows still thought WSJT-X was attached to the default

By Philip Rose · #9291 ·

Windows too smart

Windows is trying to be too smart for its own good. I needed to use my radio computer for a zoom meeting so I shut down WSJT, plugged in a mike and took care of the meeting. When I restarted WSJT I

By Bob Lewis · #9290 ·

Re: Decoding JT65A signals during XMIT period with WSJT-X

Hi Joe et al, The only reason I was experimenting with connecting my K3 to WSJT-X was try out the Doppler Tracking option. That is how I ran into the problem of being unable to move the cursor and

By Lance Collister, W7GJ <w7gj@...> · #9289 ·

Re: No menu available below WSJT-X header

It's a contest mode. What contest was hamming Tuesday? 73, Jim K9YC

By Jim Brown · #9288 ·

Re: No menu available below WSJT-X header

Thanks Bob. Right on and I know how that happened. Long story. Ahhhhhh yes, a menu now available again. To bad I've lost so much sleep over it. 73 Larry W0OGH

By Lawrence Godek · #9287 ·

Re: ALL.TXT?

Sig analyses software... I Googled the call and software, and a few other terms and find nothing, can you provide a name of the software please? 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL

By Dave (NK7Z) · #9286 ·

Re: WSJT log size?

Hi Bob. My wsjtx_log.adi file has just over 20,000 QSOs. The size is only 5.2 MB. By todays terms, even on an older PC, 20mb is nothing. I you extrapolate that to 100,000 QSOs, you'll get about a

By Carl - WC4H · #9285 ·

Re: ALL.TXT?

It is also used by W9MDB's signal analysis program 73, N0AN Hasan

By Hasan Schiers N0AN · #9284 ·

Re: No Signal IN

That’s a good thing to know, Thanks 73 Marty K7CMI

By Marty Paulson · #9283 ·

Re: No menu available below WSJT-X header

Hi, You've probably inadvertently unticked the menu box, far right next to Tune. HTH Bob G8HGN On 30/04/2020 16:54, Lawrence Godek wrote:

By Bob G8HGN · #9282 ·

Re: No Signal IN

Thanks for all who piped in to help. I finally found my problem. I knew it was something simple. Went to system preferences, security and privacy, select microphone and make sure WSJT-X is checked

By Ron W2RAL · #9281 ·

No menu available below WSJT-X header

Tuesday i worked FT4 stations. yesterday i was working FT8 station left and right on 15 and 10M. When i went to 20 to see what was going on on the FT4 frequency i noticed i had no way to change

By Lawrence Godek · #9280 ·

Re: fake it split suddenly stopped working

With the shift key held down on my machine and clicking with the mouse on the frequency i want to set the transmitter to, works fine for me. The checking of the hold trans freq doesn't

By Lawrence Godek · #9279 ·

Re: ALL.TXT?

As Don says, it can be useful as a fallback. Due to the way that I access WSJ-X (through ssh over x-windows) if there is a crash on the remote terminal accessing the computer with WSJT-X before a QSO

By Bill Lederer · #9278 ·

Messages