I’ve never understood why you would use Tab 2. Is there some advantage? I’ve always used Tab 1. Gary - AG0N

Yes Jim guilty as charged Anyone else want to kick me in the A$$?? Fred KB4QZH

AND RTFM for both radio and WSJT-X 73, Jim K8YC

Bill, I just tried and it works!!!!! And I tried it few more times also....and it works Wow I wish I could just delete this whole embarrassing thread... All I can say is thank you very much and I owe

Hi Fred, Sorry to join this threat very late. I have not problem with WSJT-X and my IC-7610. 1) The Settings Tab from WSJT-X: 2) On the IC-7610 a) Mode is USB-D2 (Screenshot is from Win4Icom). Not

On 01/03/2020 21:18, Fred wrote: Fred, it appears you ignored my earlier reply which would have saved you a lot of trouble: https://groups.io/g/WSJTX/message/6967 73

Thanks Bill Fred KB4QZH

On 01/03/2020 21:04, Fred wrote: Hi Fred, here: 73 Bill G4WJS.

two questions: 1) what mode is VFO B in on your rig?-------USB-D1 2) what Tx audio offset do you have set in WSJT-X?--------Where would I find this? Thanks Fred KB4QZH

On 01/03/2020 20:26, Fred wrote: Fred, two questions: 1) what mode is VFO B in on your rig? 2) what Tx audio offset do you have set in WSJT-X? 73 Bill G4WJS.

I had Tab 1 in use and I had some of those situations, less than 2 %. Unfortunately it was more important to log the QSO than study what was exactly causing it, so I just copied received message to

Thanks guys for not just giving up on me... First believe me I have tried every setting...but let's not go there.... WSJT-x settings.... Mode ---Data/Pkt Split Operation ---None I am not running

I suspect he was not on the Message Tab1. This is a requirement that has been talked about here, and on the dev list, and is usually mentioned before contests. However, I'm not sure that

I have the same problem, but I started noticing it only a few days ago. My system time is synchronized with an NTP server every two hours, so this is not a timing issue. The CPU is i7-6700K 4 GHz,

In yesterday's FT4 contest, a friend of mine experienced a strange logging problem in WSJT-X 2.1.2-win64: The contest exchange data (RST and serial, both sent and received) was not copied into the log

Curt, A friend of mine has a similar problem when in Hound mode. Decode and monitor stops after his transmissions. I have seen his screen shots and he will have no decodes for several minutes. If

Ken, Thanks for the note. The computer keeps telling me there is a problem opening the input device that I have been unable to find yet. Dick KS0M

Set "Split Operation" to None. What WSJT-X calls "split operation" is only for splits within the receive waterfall. When this is set to Rig, WSJT-X usurps the rig's Split function and uses it to keep

Fred: I don't use HRD but, with WSJT-X controlling my IC-7610 directly, this is what I do when I want to operate split for working JA on 160m: I set the 7610's Main VFO to 1908kHz, ie. the frequency I

Yes. W9MDB "Time Fudge" utility was developed for exactly this use. It's one of several useful links on his qrz.com page. 73, Jim K9YC