I downloaded a fresh copy of Hamring to a new computer. The download took a LONG time and when I went to extract the downloaded file my pc said it was about to extract 860 files. Is that

I have purchased a IC-7300 and TI-5000 to do FT8 on my Windows 10 laptop. I am trying to use WSJT-X. After over 50 hours of trying, I need a tutorial or help on how to get it going. I have looked on

WSPR 2.12 is running on my Dell Optiplex 755 running Win10. This is the newest version of WSPR. It only uploads a portion of my spots. I cannot get WSJT-X to work even though all of the settings are

Phil, Thank you for providing your call. It helps. Looking at pskreporter, I see you are being heard in various areas, mostly in the western Pacific, and some in the USA. Looking at hamspots,net,

Michael, This old WSPR does not seem to handle uploads too well. But this might just be that it tells you when WSPRnet is too slow. I'm not sure how you tell whether WSJT-X succeeds when

WSPR 2.12 is now working correctly. It transmits and receives correctly. It's just not loading all of the spots found but only some of them. Very curious indeed. I can't explain it. I'll work on

Hi Michael, I assume Rx is OK, or do you have a problem with the audio connections? 73 Bill G4WJS. On 27/04/2020 15:51, Michael Wolfson

Control over rig doesn't work. No receive or transmit. I've set it up exactly as WSPR 0.8 but no avail. Mike WB2GOF

Hi Michael, no problems using WSJT-X for WSPR mode here, what doesn't work for you? 73 Bill G4WJS.

As stated previously, WSJT-X doesn't work and WSPR 2.12 doesn't have that option. 73, Michael WB2GOF

File > Settings > Reporting > Enable PSK Reporter Spotting. If you already have that, I can’t help. 73, Paul G4IJE.

Hi Gil, task manager does not help much in this scenario. MSK144 is largely decoded using a single CPU thread, but task manager averages the CPU load across all CPU threads. So

Go to Task Manager and you can see the CPU load. I seriously doubt it is going to be a problem with that CPU. Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb

I finally got WSPR 2.12 to run. But now it's not uploading all of the spots. Any suggestions, please. Michael Wolfson WB2GOF

I found the same thing using FLRig instead of Commander. Fake It works instantly but Rig has a 1-2 seconds delay. 73, Carey, WB4HXE -- 73, Carey, WB4HXE

Rich, Thanks for that. I looked awhile ago and CPU Usage was running between 25% and about 45%. I do have a lot of “stuff” running concurrently, we’ll see if this new machine can handle it

Bill, Ok, thanks for making that clear. I would think if the opposite that I wouldn’t be decoding anything I wasn't hearing by ear....hi hi. Well, now just deciding if the case fan running 40% of

An easy check would be to open the Windows Task Manager and look at the CPU usage under the Performance tab. I am quite sure you will find that the number you are seeing represents the percentage of

Hi Brad, the percentage shown is an estimate of available CPU resource used, so you are fine with plenty of reserve capacity. Setting "Menu->Decode->Deep" allows the decoder to average over more

Hi Brad, Your processor is much better than those used at the time Guide was prepared! The lower value the better! The weak ones are just not decodeable. 73, Reino OH3mA