HI Bill, OK, I will attempt to obtain the failing sequence. 73, Ron On 4/8/2020 14:36, Bill Somerville wrote: -- 73,Ron / W4MMP

On 08/04/2020 19:48, Bill Somerville wrote: Hi Dick, also check you are using the latest version of VAC. A recent update revised the default values for that parameter and the

I gave up the idea of entering a claimed score. I think I wrote something like "no idea" in the box! How does this contest manage to accept ADI files when others can't? One thing I did notice is

Hi Dick, we hope to have addressed the issue with timestamps in the ALL.TXT file rolling over to the period after the messages were decoded for the next release. Your issues with accumulating

As an SWL (PA2015) I have been using WSJT-X v2.1.0 to unattended decode several digital modes 24/7 and whatch my catches at pskreporter.info . The last few weeks I have been chasing a problem where

Hi Ron, Hamlib's communication with the "rig" is synchronous so each command exchange must complete before the next starts. If you TS-2000 emulation is not coping with al the

Hi Bill, My issue goes a bit deeper than that. Without boring you to much with details I have written a custom application to support my company's transceiver. The

Hi Ron, there is no public outstanding issues list. USB and serial ports, or indeed USB to serial adapters, are treated the same on all Linux versions and pretty much the same as on any desktop

Hi, Is there a known issues list available? I would like to check before posting the issue here. But just for the curious, it is an issue relating to using and accessing USB/Serial ports on the RPi

Well this is the 1st time we have done a contest like this so there will be a couple of teething issues. We do try to make it as easy as possible. Are you sure you need to enter a score - it will be

I've just dabbled in today's RSGB FT4 contest and have my .adi file ready to upload. Unfortunately they want me to claim a score. Is there an easy way to calculate this score on my Linux PC or do I

Urp ... you're right ... but the USB sleep may be some of the issue. What else is running on the computer at the same time? Neil, KN3ILZ On 4/7/2020 1:22 PM,

Thanks that... Looks like a hard coded issue. Will keep investigation as this limits FT4 to be only used in the predetermined contests. All good.. Trent Sampson 0408 497450 Please excuse brief

Trent, What else in addition to the Shires Code needs to be exchanged for valid contact? There is always a possibility just use Free text, although it means an additional message. Just as a joke

Hi John We wish to add this to a contest and it will require to be in a Contest mode, We will announce different Frequencies to work the VK Stations in the contest on FT4 Regards Trent VK4TS PO Box

Hello Philip, No. The only thing one can do is list the hardware devices created on the USB hubs. I know f.e. that the IC-9700 creates 2 virtual com ports (one for CAT and one for GPS data) so the USB

Hi all, Still keep on finding out if I might succeed in finding a workaround for the audio in and out issue with WSJT-X. I might have found kinda solutions that takes only a few seconds before

Hi Philip, No there's not. But I can identify them by looking in to the system preferences under USB devices. The USB audio codecs are grouped when on the same USB hub. SO virtual com port(s) from a

Hi Bill, Thanks for these tips. I read about it on several forums and discussion lists. I also wondered that it could be related to the hardware or OS by Apple. But since software like Fldigi and

Greetings Team, Owing to the Covid Lockdown we are considering modifying an Australian Contest to include FT4 as a valid mode. We need to exchange a Shires Code - it is three digits in the for AA1