N1mM Logger is not available for Linux

I agree. Exchange of R is the completion of the contact. If the other station repeats their R after I've sent my R then it's not complete. 73 Phil GM3ZZA -- 73 Phil GM3ZZA

Hi Bill, Thanks for the fast response and suggestions. Glad you are looking at the "timestamps" issue. I can provoke that by stop/starting the audio feed. So if you want me to test the next

Contest logging is best done by a contest logger. Freeware N1MM Logger Plus interfaces with WSJT-X for many contests. It checks for dupes (within the contest) and computes a claimed score. If I'm not

A final 73 is NOT a requirement of a QSO, and serious contesters will usually not send it because it wastes a TX/RX cycle. It is part of the WSJT-X protocol only because of it's use for certain weak

HI Bill, OK, I will attempt to obtain the failing sequence. 73, Ron On 4/8/2020 14:36, Bill Somerville wrote: -- 73,Ron / W4MMP

On 08/04/2020 19:48, Bill Somerville wrote: Hi Dick, also check you are using the latest version of VAC. A recent update revised the default values for that parameter and the

I gave up the idea of entering a claimed score. I think I wrote something like "no idea" in the box! How does this contest manage to accept ADI files when others can't? One thing I did notice is

Hi Dick, we hope to have addressed the issue with timestamps in the ALL.TXT file rolling over to the period after the messages were decoded for the next release. Your issues with accumulating

As an SWL (PA2015) I have been using WSJT-X v2.1.0 to unattended decode several digital modes 24/7 and whatch my catches at pskreporter.info . The last few weeks I have been chasing a problem where

Hi Ron, Hamlib's communication with the "rig" is synchronous so each command exchange must complete before the next starts. If you TS-2000 emulation is not coping with al the

Hi Bill, My issue goes a bit deeper than that. Without boring you to much with details I have written a custom application to support my company's transceiver. The

Hi Ron, there is no public outstanding issues list. USB and serial ports, or indeed USB to serial adapters, are treated the same on all Linux versions and pretty much the same as on any desktop

Hi, Is there a known issues list available? I would like to check before posting the issue here. But just for the curious, it is an issue relating to using and accessing USB/Serial ports on the RPi

Well this is the 1st time we have done a contest like this so there will be a couple of teething issues. We do try to make it as easy as possible. Are you sure you need to enter a score - it will be

I've just dabbled in today's RSGB FT4 contest and have my .adi file ready to upload. Unfortunately they want me to claim a score. Is there an easy way to calculate this score on my Linux PC or do I

Urp ... you're right ... but the USB sleep may be some of the issue. What else is running on the computer at the same time? Neil, KN3ILZ On 4/7/2020 1:22 PM,

Thanks that... Looks like a hard coded issue. Will keep investigation as this limits FT4 to be only used in the predetermined contests. All good.. Trent Sampson 0408 497450 Please excuse brief

Trent, What else in addition to the Shires Code needs to be exchanged for valid contact? There is always a possibility just use Free text, although it means an additional message. Just as a joke

Hi John We wish to add this to a contest and it will require to be in a Contest mode, We will announce different Frequencies to work the VK Stations in the contest on FT4 Regards Trent VK4TS PO Box