The com port of the radio does not have a number. When you plug in your USB > Serial (FTDI a good one, btw), it will create a com port on your computer. Go into Device Manager and find that Com Port

Message is: Rig failure Hamlib error: Communication timed out while testing getting current VFO

Here's a photo of the WSJTX setting on my pc

Thank you Hasan for the reply! The cable is BlueMas49ers FTDI USB TNC Cat cable for the Kenwood TS-480 from KJ6ZWL. Will try and confirm settings to be agreed in all devices and software. So

On 07/04/2020 17:21, Scott Branyan wrote: Hi Scott, what error message are you getting from WSJT-X, including the details. 73 Bill G4WJS.

You can't have the Kenwood ARCP program running at the same time you are using WSJT-X in CAT mode. WSJT-X can talk directly to the TS-480 serial port if you configure the X settings correctly and they

Hi! Trying to get Windows 10 WSJT-X setup to play with the TS-480 for Fox/hound. I've been using WSJT-X software manually with the radio--set to VOX--successfully. Have added a CAT control cable

Neil, Thanks for the reply. I think you are referring to the Monitor button, which is green. The problem I am referring to is the Decode button, which is turquoise and lights at the end of the

Hi - I have been running 2m EME using WSJT 10 for some time and tried WSJT-X yesterday on JT65 EME. Decoding seemed ok with one exception: the decoding time on WSJT-x takes 25-30 seconds, well into

tested whole day and seems to work fine. Setting wsjtx process priority to High solved the problem. Thanks! 73 krzysztof

That was it. Problem solved and got it to launch successfully. THANKS!

I have used a 1500 hz offset on all of my Yaseu radios and all is well!!

On Tue, Apr 7, 2020 at 12:29 AM, Jim Cooper wrote: Recently I switched my FT8 operation from an IC-7000 over to a Flex 6600M, and the 'no decodes' problem became very bad ....Hi Jim - Can you

Dennis, the fact that the Decode button stays green only means that you're not Tx. I do see this occasionally when I get a Windows update, and M$ decides to 'help me' by turning the

On Mon, Apr 6, 2020 at 09:29 PM, Jim Cooper wrote: so far, my final solution was to set the Priority for wsjtx.exe and jt9.exeyup, thats might be the solution! I will give it a try. I remember i

Hi Timothy, On 7.4.2020 5.48, Timothy Nichols via groups.io wrote: .. I don't hava a Mac myself but it looks like that there is space missing in your "cp" commnad. Please

Recently I switched my FT8 operation from an IC-7000 over to a Flex 6600M, and the 'no decodes' problem became very bad .... I could watch the waterfall and visually see times when it stopped for a

Sure. Here you go (btw, this process was repeated 3 times with the same outcome): acBook-Air:~ timothynichols$ sudo cp "$HOME/Desktop/sysctl.conf"/etc/ Password: usage: cp [-R [-H | -L | -P]] [-fi |

Actually if the call is /A1, /A2, /A3 those are the country codes for Djibouti, Botswana, and Tonga! But Lawrence Welk was also a good answer. 73, David, WA1OUI

On Mon, Apr 6, 2020 at 05:51 PM, Timothy Nichols wrote: Well, that solved the launch issue, but the Shmmax problem remains... That points to the sysctl.conf file procedure not being properly