Ok, let's try this folks... ONLY for those who own/have access to a Kenwood TS-440S... IF you have it working with wsjt-x; please share your settings! Take snip images... (Please, no other 'weird'

I understand the confusion... I took this snip as the last setup I tried! Seriously, I have tried every combination over hours & seeing the same error! - I am not going to snip & post every

They are not the same. You have hardware handshake selected in WSJT-X versus RTS always on in N1MM+. Note that the RTS selection in WSJT-X is grayed out (because it is overridden by the hardware

Ok Joe & Bill, Here ya go, they both 'look' the same... one works (N1MM), the other, not so much! Joe, in case you didn't pick up on last night's exchange with Bill & I; We got the rigctl, to

Worked a ZW5STAYHOME station and it logged as RR73, anyone else have this problem? Stan KK3KK

Hi Steven, I don’t know where the contest log is either, but this program will do all the conversions you want to do (ADIF Master): http://www.dxshell.com/ GL, Ted K7TRK

Please post screen shots of N1MM+ Config -> Configure Ports -> <Radio Port> -> Set and WSJTX File -> Settings -> Radio Since the rigctrl debug appears to work with handshake turned off, it would

Bill, having a little trouble with this. Forgive me. I not good with software. I guess the contest log is started automatically when you go into contest mode? Is it only in Cabrillo? Reason I ask

Hello Matt, yes... I have experienced that too! Especially with v2.1.2.! I believe there is a problem with the auto-sequencer sub-routine as it acts something like a stack overflow ... it seems to be

You are welcome Walter, I just saw a pattern emerging & my rather limited knowledge of foreign punctuation variances... I have seen similar issues crop over the years. Good hunting! 73 - John -

Thanks Bill. I found my problem was that USB (uppser sideband) did not have the audio coming from the REAR (which is the USB serial to the Pi). That's the missing bit. 73 Barry

Loaded fine onto HP Pavilion dv6 laptop, WIN 7 Ultimate. Install was smooth. I did need to update JTAlert though... Working great. 1st contact from Silicon Valley with improved performance of

I have Tx working now. There were some FT991 menu settings to change: 108 SSB Mic Select: REAR 110 SSB PTT: DAKY (which means via the CAT USB interface) 111 SSB Port: USB In WSJT I have PTT via CAT

Hi Barry, if your rig limits the Rx pass band when in USB-DATA mode you can check the WSJT-X options "Settings->Radio->Mode->None" and "Settings->Radio->Split Operating->Rig". Then you can set Tx VFO

I'm trying to get a RPI working with my FT991. I'm just using the single USB connection from the FT to Pi. Rx is working ok, but Tx is not, with the radio in USB mode. If I change to Data/PKT then it

I've been having this occur with significant frequency with my QSO partners, and saw in another group that others where having this issue with WSJT-X. I'm running JTDX and have not seen my end have

Haris wrote: > "When the decimal point in regional settings is set to "." (period) we have the not launching problem. > When the decimal point in regional settings is set to "," (comma) the program

Forgive me for being off topic but I am having trouble with a Cushcraft R9 antenna assembly and lint find any type of group like this for help. If you have familiarity with tuning the 30,40 and 80

...and one other note: Far fewer -24 decodes than I typically get. I don't know if the scale has changed or what, but the difference is striking. I have always gotten several per sequence on 20m no

Hi Bill, For the record... I was wrong! I called Kenwood U.S.A. this morning for some clarifications. My rig; which s/n starts with 711xxxx - was manufactured in 1986. Production of the TS-440 ended