Will the GPS receivers work ok indoors, or do they need to be placed outdoors or near a window, etc? Jaj wb2qqj

God Bless you Ray. Little behind you on the curve, I turn 70 in Aug. Contemplating Linux, my Son is a Linux Guru. Made a nice carreer of it. I have yet to abandon the Mother Ship but realize do not

Hi Chris, Yaesu radios with built in USB connections create two virtual serial ports called standard and enhanced. The enhanced port is the one that includes CAT control. See the Yaesu driver

Press test cat, after a minute (long time) it shows splash screen saying something like “error ham lib time out getting vfo... I suspect it’s possibly related to the silicon lab driver because I

Does it do that simultaneously with digital signals? There are only four conductors in a USB cable right? Five volts, ground and two signal lines. I will have to do some research now. That

I also switched to a GPS time source here in Florida. Last ATT modem I had to run a VPN to work my Flex radio’s remotely. I could not get a reliable time off of the internet under those conditions

Hi. GPS locked (disciplined) frequency standards generally have more stringent requirements above that a 1PPS system can use regarding antenna location for good performance.  But, if you can locate

Hi Chris, what error message, including the details, did you get? 73 Bill G4WJS.

Hi Paul, the audio signals passed over the USB cable are in the form of PCM digital audio, they go to and come from the audio codec built into your rig. The audio codec is basically a DAC and ADC

The information on the USB cable is digital. The digital-to-analog conversion is done inside the radio by the USB audio codec. 73, Rich VE3KI

I see my original post resulted interesting popularity: while nobody answered here in the group, many of you feel the urge to call CQ right on top of this unknown signal. Nowhere else, no higher, no

The program is working as designed. If you were replying 'on frequency' or simplex to the station and the CQ station replies to someone else, the program is designed to turn off "Enable

Your USB cable is a serial port with an digital-to-analog device at the other end. S/PDIF is a fiber optic port for direct connection to any device so equipped, for example a CD/DVD player. For most

As has already been suggested, if you use PulseAudio and the associated volume control utility you will be able to see and control every audio stream easily. 73 -Jim NU0C "Paul Hamilton"

does anyone have their settings for CAT of the ftdx3000 on OSX Mojave (or late OS) USB direct connect to ftdx I started yesterday. I had it working for one qso. shut it down and now again wont pass

Yes. If I use Windows Explorer and go to ProgramData/Hamapps/sound I can play the various .wav files just fine On 4/10/2020 8:53 PM, Herb Blue wrote: -- John Mc Hugh,

And built by a Ham!!! Bruce N7XGR

I agree, the rules on the website whose link was provided in a previous email does not make any reference to using FT4 during the FT8 contest this weekend. Butch N5SMQ  I also went to

And Btktimesync is free On 4/10/2020 3:23 PM, Robert Lorenzini wrote:

BTW:Your symbol looks like the silhouette of an F-18, is it? My first engineering job was at McDonnell Douglas in St Louis testing radios for all four aircraft we built. I dearly loved that job! If