Hello again... Just thought I would let you all know and anyone who is also looking at this problem that Herb Blue was correct.. I set the screen saver to not kick in for 4 hours and as long as that

Bill, The physical connection from the audio source, Signalink, and the PC is good so the processing overload is a lead worth following. Thank you, Ed

I have now close this topic. Andy K3UK

Why do people get upset with this? It's a hobby! There are far better things to be concerned about specially with the current Pandemic! Been a Ham since 1965 and never pursued any "Awards" choose to

Many Hams do not fully understand the inter workings of LOTW confirmations and paper QSL cards and their affect on various awards. A paper QSL card confirmation is different from a LOTW confirmation,

Straightforward, measure a known frequency near the FMT frequency, establish a correction factor for your equipment, apply the correction factor, and hope you get the doppler correct. Not complicated

I think I have that software, are there instructions somewhere on how to configure and use it for the FMT?

Most ops who are serious about FMT use Spectrum Lab, easy to use and highly accurate. Mack W4ENN Sent from Mail for Windows 10

Larry Thank you, Delay off - Problem solved.

Here using a Kensington Docking Station, where audio is plugged in from the radio station’s mic and loudspeaker (using different radio stations), and an USB cable connects the PC to the Docking

Dave, I do not use computer control on the 736 by choice. Frankly I don’t need it and don’t want the potential problems it can cause and I do just fine doing as someone said using “the big knob

many thanks Hans.....world of difference from the DOS command method published by JT, will give these a try.....

Wouln't it be a good idea for the IARU to remind all licensing adminstrations about the international regulations regarding callsigns ? Time to be reasonable again !!! Too many nonsense

Well told. I wholeheartedly agree with you. Just like the vast number of valueless so called "awards". Did you work with me? Wow, wonderful, that's worth of an award. What say, so you did not? Never

Thanks for the detail in the instructions! 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist ARRL Asst. Director, NW Division, Technical Resources

Thank you!! Your suggestions resolved my problem. -Kurt, KR2C On 4/16/2020 9:08 AM, Bill Somerville wrote:

Jamie, Here are the detailed instructions I wrote to help people with FreqCal in WSJT-X https://drive.google.com/open?id=1TDmsfPBzw7poLVA-G6JNWdXn4qJgeY93 73, N0AN Hasan

Jamie, Are you having difficulty with the initial calibration routine, or are you having problems with the FMT run, itself? I have a good set of instructions for calibrating using WSJT-X FreqCal, but

I have the tuning resolution set to the lowest.....its the software that calculates the exact freq, or what it thinks is exact, once you calibrate it. I was hoping Joe Taylor monitors this group, as

On 4/18/2020 9:07 AM, Jamie WW3S wrote: Just a thought. What resolution will the CAT software commands for the IC-7610 allow the radio to be tuned to? Is the software restricting the