Hi Richey, I experienced much the same problem. I realized early on that it was caused by stray RF getting into the computer. I finally cured it completely by running a #14 copper ground between the

I've been using WSJT-x for several years and during this time I've had problems that I've always been able to resolve. I now have a problem that has me stumped. I can decode on FT4 but not on FT8.

Here is a link to a number of 25-40 years old documents https://rudius.net/oz2m/files/locator_system.zip and to the VHF Managers Handbook

Hi Richey, From the description of the problem at least partly there is RF ingress disturbing USB CAT communication and resulting that Hamlib error. I have no experience about RIGblaster and com port

Well said. Some of us have lives! However, the expertise here has been excellent. Keep it up. Art., N2KA..

Fix Hamlin issues....use USB to CI-V works every time at least it did for me and has been stable ever since.

are you having an issue. are you receiving signals on ft8 or ft4??? are you able to transmit/with audio??? Dave Garber VE3WEJ / VE3IE

Am I the only one to encounter this issue? Richey .....

The lower case convention for the last two characters of the Maidenhead Locators is just a holdover from the previous locator system used in EU up until the early 1980's before the unique worldwide

Hi Colin, the letters in Maindenhead Locators are equally valid in either upper or lower case, there is no ambiguity. We switched to upper case enforcement in WSJT-X because some operators have

HI TRENT, a Google search sent this site: https://www.reddit.com/r/amateurradio/comments/avgvwy/icom_746_nonpro_signalink_usb_and_digital_modes/ gl

Hello, Reposting for clarification Long time ham, completely new to digital. Eager to get things up and running I have a signal link USB into my Icom 746. Using cable that plugs into mic jack.

The "officials" is the IARU, which defined the QTH Locator system, also called the Maidenhead Grid Locator System. 73 from Tom, LA4LN Sent from Outlook Mobile From: WSJTX@groups.io <WSJTX@groups.io>

There are a limited number of moderators and there will be certain times of the day when all of us will be tucked up in bed. At other other times there may only be one of us awake who has better

Hi Joe, Thanks for the reply. Interesting as to who the "officials" are but if that's what it is I will just have to keep accepting the changes from LoTW. Thanks to you and the

If there were changes to JT9 we would have said so. JT9 is already well optimized for its intended purpose. It needs no algorithmic tweaks. As I think we already stated: New modes now in

In the past we used lower-case letters for the last two characters of a 6-character locator. We changed to forcing upper case when we were advised that "officially" (whatever that means in this

I like to put the full 6 digit locator in the log which i normally get via Logger32 and Rick's Lookup software but I have noticed that when i type the first of the two additional letter it is in lower

Trent, I am also new to WSJT, but have worked it out to be able to operate... I also have Signal Link to an Icom 746, I went with the cable to the rear of the radio. Currently am having no

Hi Hasan, Sorry for the latereply. Life does get in the way. You are correct in that a N of 10would be statistically useless. I am not a prolific user if eitherFT8 or FT4. My primary use of these two