Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card on a Icom 7610. I am just returning to digital communications and am having serious problems configuring

I support the question. For the approximately 10% of males that have a green/red colour deficiency, this is a problem. Tom OH6VDA

I am just returning to digital communications and am having serious problems configuring WSJTX in FT8. My configuration is driving me crazy. I can have FT8 decode the messages but, the JTALERT will

Finally, someone who knows how to actually answer a question. Bless you, Sir. This is exactly what I was looking for. I was unaware there were multiple DATA modes.That was definitely not clear in the

First off, I am working with a K3S, not a 991. I have worked with Icoms, Yaesus, Kenwoods, and a few others, I am somewhat familiar with them. This is the first Elecraft, and it is considerably

That was the configuration I started out with, except for SPLIT, where I had NONE. I guess I don't understand how SPLIT works in this context. You said the audio is set to LINE IN. Is that MIC SEL on

The radio should be in DATA A mode (there are four data modes - you have to select the correct one using the DATA MD button at the lower right corner of the keypad together with the VFO B knob). In

Once the appropriate menu settings are cared for (quite common in just about every new radio these days) it’s simply a matter of putting the radio in data mode. My K3 was pretty simple to set up

DXLab, Log4OM, and many other free logging programs already do that quite well - in Log4OM, it’s 2 mouse clicks to download the QSL status from LoTW and eQSL, for example - JTAlert then shows

Right. RTFM. :) Elecraft radios remember lots of settings by band and mode. 73, Jim K9YC

Here is a little debug tip to put away until you need it ... For the past couple of days, I was frustrated because left clicks of the mouse in both the left Band Activity window and the right Rx

FWIW on my FT991 I set the Custom Switch button to take me to the correct menu item. Switching becomes easy-peasy between voice and Data. Adrian VK5AW.

me 2; DxLab is amazing; updates frequently...dave is a champ.. 73, w5xz, dan

I have FLDIGI working FLRIG with no problem on a PI 4. However, to get WSJT-X to work, I had to downgrade to 2.1.0 because as soon as I select FLRIG, WSJT-X cold crashes. This is running 2.1.2, which

Building a portable digital station. Got the same error when I fired things up and tried to use WSJT-X. Hamlib error: Command rejected by the rig while setting frequency. WSJT-X 2.1, RPi 4 running

I was helping a friend set up his K3S for FT8 this afternoon. Haven't played with one of those before, quite a challenge. Our main problem was getting audio into the transmitter. What finally worked

Is there a way to make the green receive indicator a different color or make it bolder? I have trouble seeing it. Tnx Dave KA3PMW

Hello, I’m having an issue with bluetooth shutting down within a half hour of operating wsjt-x with an ic 7300. MacOs 10.13, running 35 watts to dipole antenna. using shielded usb a/b cable with

YES! JTJAlert supports DXKeeper and a few other popular logging programs that keep track of QSOs, awards, QSLs, etc. Both programs are FREEWARE. I've been using DXKeeper since getting back on the air

Hi all. Afaik wsjtx can send qsl info to almost all popular log programs. So why would one need such an option in the program itself. 73 Richard PA3gcu. Verstuurd vanaf mijn iPhone