Check your computer clock with some reference. While Windows does provide a time service, I've found it is not adequately accurate for WSJT-X and FT-8 modes. I personally use a free

Great answers from both of you Bill and Zeev. This resolves my issue. This shows that in the background the activity, once launched, wait for an addition of the latest contact into the wsjt.log (the

Seannon, My problem with the no power issue seems to have come down to the red xmit bar jumping out of range on the waterfall on transmit. Sounds crazy but it happened. I was looking at every

I'm afraid I'm not computer savvy enough to do my own build. So while waiting for the dev team to consider this polite request, is there any way to obtain a build with the patch described by Kari

Hi Seannon, have you checked the levels in the pavucontrol application? If you don't have it then install the pavucontrol package. 73 Bill G4WJS.

Also check the audio level you have set (speaker) on the computer. I also had no power out a few times, but bumping the audio level up a few % brought the power out right back.

Best ask on the JS8Call list. groups.io/g/js8call 73. Dave G0WBX. -- Created on and sent from a Unix like PC running and using free and open source software:

Use get-content ${Env:LocalAppData}\wsjt-x\wsjtx.log -tail 3 -wait | foreach {echo $_.split(",")[4]} to show only the Callsigns without the need to change directory. 73 de 4X5ZS

FLDigi uses the same ones...it's the ones on the side of my laptop -- “It is a simple feat of scientific electrical engineering — only expensive — blind, faint-hearted, doubting

Don't overlook the obvious. Check your audio connections. 73 -Jim NU0C "Seannon Baker (AG0NY)" <KD4IYI@...> wrote:

so, here's my screen, just pulled it up to screen shot it first one shows tune, bottom left next is it in transmit on JT9, transmit light is on, but no output on the radio note it's at 1500hz tx and

Andy K3UK

Good advice, just don't create an ergonomic nightmare for yourself. The top of the monitors should be about eye level and no closer than arm's length. I see a lot of shack photos that are recipes for

I'm on Windows 10 home. If I open a Powershell, then from my home directory do "cd appdata\local\wsjt-x", and then do "get-content wsjtx.log -tail 3 -wait", I get the data for the last three QSOs.

I was not able to get the script to work, in my case it didn't find the directory where the wsjtx.log file is stored. However if I open a powershell in Windows 10, then navigate the the directory

If one uses the Data A mode and uses the single USB cable between the computer and radio, none of the other settings or values is required. No VOX, no DTS, no DTR and the TX EQ is

Thanks, Dave but guess I wasn't clear. I was thinking JS8CALL. Print is just too small. Thanks again and 73, de Phil, n6qca

I've found that Windows time system is not adequately accurate nor reliable enough for WSJT-X and other time demanding modes. There are several time applications that will keep your

I don't advise using MIC + LIN because during transmit, anything picked up by the mike will also be transmitted. This would then be voice transmitted in the non-voice band allocations.

Bill, Thanks for the feedback! I don't need to switch other devices, but I can see how the DTR or RTS method could be used to trigger a sequencer. John W2HUV