First, your state is FL not DL (typo I'm sure) Second, I have seen this same behavior a few times. Doug Gerard NP2GG

I noticed that when I CQ, I have to enter my state in response to an invalid exchange message. It logs ok when I respond to someone. I do have RU mode set and my exchange is DL. Anyone experience

Thanks for the correction John. Andy

This document is actually written by ZL2IFB, and version 1.19 (56 pages) at this link is from April 2018. The latest version, currently 2.27 (79 pages), is always posted

I thought I found it but no. Suddenly back as it was and the CQ is not shown in the left window. It does get colored green as configured but I do not see the decoded CQ or CQ DX. What is the ~ for

Hi Dave, for date input into the graphical user interface WSJT-X uses the regional default short form as set in your operating system's localization settings. You can choose whatever you

Why doesn't software intended for international use, that uses dates itself use the international (ISO) format yyyy/mm/dd that all OS's support and understand?    

Thanks Andy. Appreciate your message and the link to the guide. 73 WB8RFB

Just finished operating for about the last hour and the errror did not pop up, thought it did earlier tonight. Recent changes tonight are: 1) changed the data bit and stop bit settings from 8 and 1

If you are talking about AGC with modes like FT8, FT4 , the usual recommendation is to experiment with various settings on the rig and see how they impact varying receive conditions. K1JT's 2018

That is what I was using just easier for me to read and sort thanks for the quick response.

The one you are least likely to misconstrue or enter incorrectly. Personally I always use yyyymmdd (or yyyy-mm-dd) - it is unambiguous, and not only does familiarity with it make reading Cabrillo and

I like using the Decodes Window available in Settings>View. You can see the Directional CQ, and much much more if you like. You can customize. 73, Herb WB8ASI

I have an FTdx-3000. What is the recommended AGC setting? Thanks. WB8RFB

aha ... GLAD you found the problem ... there WERE big changes from v 1... to v 2...

I found the problem. I had an old version AND the latest installed. I did not realize that install of a new version does not remove the old one as almost all other Windows programs do. I simply went

Hi again Bill-- I tried setting rig control to CAT, and got the same behavior as I mentioned before; the rig keys, i hear a tone but nothing actually goes out over the air. I have a speaker connected

Hi Bill-- Sure thing. It's attached. Thank you! 73, Andy K3NP

Andy, any chance of sharing with us the actual error message from WSJT-X? For you convenience you can copy the full error message text, including the important details panel, to the

Outlook Desktop Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb