what they're saying is if you can hear someone transmitting, wait til they're done, if you transmit and can't hear them, it's unintentional, that's ok (kinda) if you transmit on a frequency, and you

Hassan, I'm going to pick out a bit of info here... you stated that being able to use full bandwidth for SSB, but only the bandwidth of a single transmission on digital, which for this band is CW, (on

The results of the 2019 FT Roundup are now final and online. https://www.rttycontesting.com/ft-roundup/2019-results/ If you are interested in seeing your LCR (log check report), please send your

Reminds me of when my obituary was published in the local paper a couple of years ago. First I knew of it was when I got a card from a lady who does estate settlements. I asked who died and she

It's my understanding that Commander, which is part of the excellent FREEWARE DXlab Suite offers the functionality that you're looking for. 73, Jim K9YC

Thanks I don't use HRD but this could be a reason to start! appreciate the tip! Frank KB3PQT

If I can offer a bit of information: http://www.arrl.org/news/arrl-reiterates-its-case-for-new-band-at-5-mhz Hope this helps! ’73 de JIM N2ZZ

Hi Richard What is connected to the CAT connection on the back of the rig? Marty kd8bj

...hate when that happens !!

Tom, Thanks for the reply. Always glad to gather any info I can about the original W8DN. I have searched for an obit for Mr. Flora but have not been successful so far so maybe you can

I believe it was Sam Clemens who stated "Rumors of my death have been highly exaggerated."

Hi Frank, I had the same situation with my 857d and use the signaling and YT-100. My problems were with CAT control. I found if I run my HRD it fixed it. I just start HRD first and the WSJT-X. I also

So, I've spent a while searching the FCC web... everyone knows what a pain it can be.., I'm going to drop the link here and point at a couple of sections, hopefully it will help clear this up. along

This, of course, is extremely good news! Thanks for the clarification.

Good afternoon I have an 857D which is set up like the 897D.  Do you happen to have an antenna tuner attached?  I have an LDG YT-100 and has a spare CAT port so that you can connect the tuner and

Richard, there are two sockets on the back of the FT-817/857/897(D) rigs. One for DATA AFSK audio and PTT, the other for CAT control: You need a CAT interface cable if you want

Go here; https://www.tigertronics.com/pgmsetup.htm#WSJT-X John VE3KKQ

Sounds like Monty Python: https://www.youtube.com/watch?v=jYcPBE5PXhs

The signial link is connected to the data on the radio No place left to connect the computer to. Richard DeRose 561-441-6376 102 Blackjack Lane Burleson, Texas 76028 KG5FNS Life's journey is not to

So if I tune my radio to channel 3 @5357.0 mhz with a center frequency of 5358.5 mhz using FT8 . The FT8 modulation scheme is 8-FSK i.e. an 8-bit transmission using 8 different