I see 2 FT8 QSO’s with your call, when I check their log. One on 20 and one on 40.

I have had 2 FT8 F/H qso's with 5I4ZZ well over 24 hours ago. In both cases I received a "RR73" but I have not shown up in their online log. I have sent a note to their pilot per their website but

If you switch your mode to RTTY you will be able to copy. Contest weekend.--Only losers need rally caps.

Anytime I see weird looking waterfall, it's cuz I've got some filters turned on by mistake after switching modes. Check that all filters and AGC are OFF. 73, GL, Herb, WB8ASI.

If this happens on Tuesday and you are using Win10, it could be the weekly update messing with software. Sent from Yahoo Mail for iPad

Phil, Right-click in the Frequency Table and a window will appear showing what can be done. Very easy. GL/73,   Bob  K8BL   

Try turning the input volume down but also check that the correct input is selected especially if u have a microphone or camera

My mistake ! Inadvertently turned down the wrong button on the radio and was cutting down the frequency response to 12 or 1300 Hz. Thank you again. Jacques W2/F2YS.

Thank you for the reply Bill. 2600 Hz. The strange part is that this only happen once in a while and normally, without changing anything in the receiving mode I decode perfectly well from 200 to over

Check your radio filter setting. It should be the widest available for FT8.

Can someone explain to me why only the left part of my WF occasionally appears as a foggy blue color instead of the usual black background? It doesn't seem to affect the decode and will eventually

Yesterday after months of everything working fine, I was using the RA feature (Radio Astronomy) in the HPSDR mRX PS v3.4.7 software and discovered WSJT-X v3.4.7 lost control of the CAT when the SW was

Yes, I know that ... Try to get club ops to go thru that sequence each time they sit down to work FT8/4 ... Is it really a big coding job to make the Operator window sticky like Comments? Is

Right click on the frequency list and do insert. 73 Stan KM4HQE

Phil, Right click in the text area to bring up a dialog box to enter a new mode and frequency. Once entered the program will auto sort it in the list. Bill WB6JJJ

Jim, you can set the operator call in "Settings->Reporting->Op Call". 73 Bill G4WJS.

I. Settings frequencies, I saw no means of adding an entry .. Phil GM3ZZA -- 73 Phil GM3ZZA

hopefully, the three attached older emails will come through with this posting ... In May of last year, I brought up the suggestion that the Operator text window in the Log popup window be made

Same band but different freqs as set in 'options - band plan' . Just refine a few kcs

I'd also strongly recommend defining separate configurations for FT4 and FT8 operation (and also for various other operating scenarios such as FT8 Hound, MSK144, WSPR etc etc); it'll then be possible