DXKeeper is the way to go. The best real time award tracking there is. Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb

Wait .. what?? WSJT-X does not upload to LoTW .. how in the world would it know what was sent?? Frankly, that's what utility programs are for like JT-Alert and the like.

HNY to all, I would support this, specially for LoTW and paper. Also it would be nice if the calculated will be taken in the WSJT log file together with the QSO information. de Reiner,

Um .... that's a your logger's function, not WSJT-X. It doesn't log to anywhere other than its own .ADI file. Neil, KN3ILZ

HNY all, It would be nice if in the next version a QSL send status can also be given when saving the connection. So you don't have to do that again in the logbook afterwards. 73, Adriaan PE2K

Ed.. If you use N1MM in SO2R you can load 2 separate instances of WSJT one for each entry window. This does what you are asking.. 73 Rick N2AMG

I write the results article for the RTTY Roundup in QST. Please send me any high resolution photos you may have of your RTTY Roundup operation, station, etc. Note that the QST editors tend to prefer

I ran as many as three instances at one time. 2 on HF and one on 6 meters. Besides WSJTX supporting it — and only one install is required the code is re-entrant — each instance just needs to be

Yes, I think all that is needed, put each in different directory. I have done it, I think that is all I did. Good luck 73 Emory WM3M

<ewbloom@...> wrote: This question was asked and answered in this group within the last 24 hours. https://groups.io/g/WSJTX/topic/69495150 73, ~iain / N6ML

Is it possible to run two separate instances if WSJT-X, connected to two different radios, using two different serial ports on one PC? Looking to see if it possible to work 80m and & 20m at the same

I brought up this very point after the FT Roundup last month. RTTY has TU WK6I CQ. CW has TU WK6I TEST. Why don't we have the same for FT contesting? 73 jeff wk6i -- Jeff Stai ~ WK6I ~

Hi Rich I believe you have summarized the situation correctly - thanks for the better explanation. Mind you, if WSJT-X can incorporate a "TU" in a CQ message after a QSO with repeats, it might as

To be honest, it was probably something I was doing wrong or poorly. Just like some people love Fords and others love Chevys, I guess I’m more inclined to figure out Icoms. The Yaesu was great on

I agree Bill, thanks.

Actually, Steve, I think it's a bit more subtle than that. To me, it depends on whether there have been any repeats during the QSO. If the QSO goes: CQ RU VE3SMA VE3SMA VE3KI 599 ON VE3KI VE3SMA R

I had this issue when I had a Yaesu FT-DX3000. The digital mode filter was 500 khz and I could not figure out a way to change it. One more good reason I have an ICOM now.

Louis, you are incorrect, you could verify that by a simple test. The visibility of the Wide Graph window is not relevant here but the frequency span set on it is absolutely relevant. WSJT-X only

John, You can select Configurations > Default > Clone and create another radio by changing the clones setting to what you need. I do this for my Kenwood TS-590S and my TS-590SG and can toggle

This does not happen when I am using WSJT-X 2.1.2, I do not even have to have the waterfall running and I am still decoding signals. The waterfall is just an operator visual aid and has no