I have read the section on MSK144 and also the QEX 2017 article and ways to get off the 50.260 -- IE make the CQ message CQ 290 K7HP DM33 My questions are: 1. The manual seems to say I should

Email is there. Unfortunately I’m not in the position to provide direct support for WSJT-X in that capacity but all of the supported inbound and outbound UDP messages are in the code in my github

Tom, I thought I saw your email on qrz.com, but I'm not seeing it. Actually I'd like to know if the UDP datagram is read only. That is can it be used to send commands to WSJT-X via 127.0.0.1:2237? For

It is indeed!

These units are ONLY effective on one noise source at a time, and their effectiveness is STRONGLY dependent on the size of the noise source as a fraction of a wavelength and the location of the sense

Tom, Is your email good on qrz.com? I have a few coding questions that would be best asked via email. Steve N6VL

Years ago, I saw Q&A advice on a vendor website strongly suggesting that this product was built with a manufacturing defect called "the Pin One Problem," which is failure to bond cable shields to the

AWESOME! THANKS! Joe WB9SBD The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com

Hi Joe, the information you seek is in the WSJT-X User Guide: https://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.2.2.html#FAST_MODES Note also

How about the MSK-144? Joe WB9SBD The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com

Hi All, User’s Guide Table 9: Mode FEC Type (n,k) Q Modulation Type Keying rate (Baud) Bandwidth (Hz) Sync Energy Tx Duration (s) JT9G K=32,

Hi All OK question, say per transmission of 15 seconds long. The exchange is as seen here, OK in the two most popular MS modes

Ok, Now why is that NOT a good choice? Joe WB9SBD On 8/10/2020 11:41 AM, Dave_G0WBX via groups.io wrote:

Any pointers to a power config entry that would allow me to send 3W 35dbm in WSPR? Thanks

Dave, I don't understand your comments. The message linking references in the email header are hidden, they are there for email clients to keep track of conversation threads

It is configured like that on purpose, as I and many others are fed up trying to scroll to the end of a massive email on a mobile device, only to find the device has truncated it (no option

On 10/08/2020 17:29, Tony Collett via groups.io wrote: Hi Tony, neither you nor Alan are doing anything wrong with your last posts, they are linked to each other and to Joe's

Alan and Joe are correct - I also use web access to reply and therefore lose the original message (not sure why but any attempt to answer using the digest received in Outlook is doomed to

Joe, The problem for us email users is that it is the default if someone replies on the web page, as I have just done. There is the option "Show quoted text" but often not used. At the other end of

Hi John, what is the full text of the WSJT-X errors please? You can copy the full text of a pop up message box to the Windows clipboard by hitting Ctrl+C while the message window has keyboard focus,