Al I am not aware of this point. Please explain. Probably using the default. Amos 4X4MF

What T/R setting are you using. The default was 15 sec. Al KE6JAC

Ed, I wonder if your main oszillator is calbrated well enough. The end frequency should be hit with a precision better than about 50 Hz. Try to tune the VFO +/- 100 Hz while receicing MS

Hasan and all Meteor Scatter gang Are you planning any 6m Meteor Scatter activity for the next 48 hours? I can join in too but I need to know the frequency. I an using Flax 6600 active on 4

Nope, nothing. Blank screen.

Do you see any partials ? Sometimes with MS signals and this mode you may only get bits of a call sign at a time ? I have sometimes needed about 20 minutes to complete a “QSO”. Andy K3UK.

I can't decode MSK144 sigs. I'm new to the group and wsjt-x (version 2.2.1). Used FT8 without issues since early June. Tried MSK144 several times in the June contest and since without a single decode.

Thank you, G4WJS! Thanks for your comments and test on Pi3B+. That help me understand the decoding mechanism of FT8. Now I should say that computing performance is only one of the factors that

Hasan and all Meteor Scatter 10M gang I have configured my WSJT-X v2.2.2 according to your instructions. It does seem to work OK. I will be up and running from Israel in the next 48 hours which

Hi Michael, Try squirting contact cleaner on the DIN plugs on the back of the rig. For years I never could get my old FT857 to work with CAT and Bill suggested to somebody that their problem might be

Thanks, Bill It'll have to wait until the next session 'failure

Yes. I have long used small crimp lugs attached to the retaining screws for DB connectors. There's a photo in one of my slide shows. 73, Jim K9YC

Thank you so much Bill. Also for the information on how to insert this fields. Now I am able terminate my soft. Thanks to all. 73, Jean-Paul, F5BU

Jim K9YC, I have found an easy way to ground the metal shell by wrapping a small wire around one of the screw heads on the rear panel, then connecting that lead to station ground. For routing I coil

On 11/08/2020 11:35, F5BU wrote: Hi Jean-Paul, 11 is Tx power, 13 is name. Both from the Log QSO window if provided by the operator. 73 Bill G4WJS.

have a look at www.adif.org/304/ADIF_304.htm#Fields seems to have the spec of the defined fields in the peter On Tue, 11/08/2020 17:51, F5BU

Hello Reino and Charlie, Thank you very much for your feedback. Explanations: I have 2 friends working hard with WSJT-X and using 2 or 3 computer without any exchange between

I looking for help or an explanation to why wsjt-x 2.2.2 Times out with Hamlib error: Communication timed out while opening connection to rig I don't know how to troubleshoot this problem. I didn't

PC time difference is also one of the main reasons for very few contacts using FT8 or FT4. Check your computer's clock and synchronize it with a good standard. Pete K1OYQ

Good point on the beacons. I only seethree near the 28.145 frequency 28.145 DL2WB NR SAARBRUCKEN, GERMANY 2W, VERTICAL QSY from 28.245 11 Aug 12 QRT 28.147 PY3EW ? MORRO