I’ve used an FT-857D with signal link on a Mac running all the current versions of WSJT for five years with no problem. Make sure the jumpers in the signal link box are in the correct position.

I am having problems with getting my IC-7300 to work with WSJTX program. I need to know what the settings for the radio and for the program are. I can get the computer to key the radio, but it somehow

Hi all, no issue at all, just out of curiosity: It appears to me with version 2.3.0-rc1 the transmission duration for the cyclic CAT polls became way longer than it was with version 2.1.0 (I skipped

Yes, and I'm still learning.....I have the computer with windows 10 down.....but I think my issue is how I'm setting up my radio FT-857D Sent from my Verizon, Samsung Galaxy smartphone

One can only hope bill. Cheers John

Hi Les, you can enter frequencies into the frequency selection entry within the current MHz by suffixing the kHz part with 'k'. So to go to n.567 MHz where n is the current MHz (e.g. 1296) enter 567k

Hi John, if the setting is not there then I don't think there is any restriction, your issue lies elsewhere. 73 Bill G4WJS.

Hi all, I may be missing something obvious but I cant QSY directly from WSJT-X when using Doppler Tracking. I am not talking about changing bands, but QSYing within a band. I am using WJST-X V2.2

Bill, iOS 10.12.6 Sierra doesn't have the Microphone option in the Security & Privacy sidebar. Its just not there. I have no idea what the Apple people intend for apps to do if they need access to the

Hi John, macOS should have popped up a message box asking of you want to allow WSJT-X access to microphone devices, maybe you declined? To change your choice "System Preferences->Security &

On WIndows 7: When I switched the other day from the SignaLink USB set up for FT8 to a setup for MMTTY, I had to raise the TX control knob on the SignalLInk in order to get PTT to work.

Hi Bill, I believe that I have the correct settings in the 7610. I have compared my settings with others that have working units and they match. It appears that OS Sierra has a privacy issue with

Compare your settings to those shown in message 15090. Biggest difference is in baud rate-4800 versus 9600. 4800 works fine. I’m using a ft-897 in 857 mode due to Hamlib issue.

Hi John, you issue probably lies at the rig end. With an IC-7610 you should have the rig in USB-DATA mode, "Settings->Radio->Mode->Data/Pkt" will do that for you if you have downloaded and installed

Hi Keith and Al, also important is to set the user mode on your rig to User-U as that is appropriate for AFSK modes that use USB modulation. 73 Bill

Hi Ken, A couple of weeks ago, you told me that you were using a FDCPro+ with linrad and MAP65. I wonder if you could help me setting up the system at F6KLO ? First, I want to do a first try so I

Thank you Al ill give it a go see what happens Sent from my Verizon, Samsung Galaxy smartphone

Hi Roger, So in effect you are halting Tx on one band and then invoking it on a second band during your transmission time. So in this case wsjt-x considers transmission to be appropriate. Enable Tx

KC1KTS Have the same setup as you: Not sure if the snipits will transmit, so typed the details in case they don’t. Good luck. Al, KE6JAC Details in my setup are: Rig: Yaesu

Here's the rig I'm running FT-857D , into a signalink USB , WSJT-X....run with HRD cat cable Here's my issue I can only get my radio to connect with WSJT-X with a cat cable through HRD , ive