Hi Ed, there are two font choosers in the WSJT-X Settings dialog. There's one for the overall application and another which inly offers mono-spaced fonts for the two decoded text

When I was setting up WS Jt-X the font got changed to 22 but only the bottom part of the page. The portion with band activity and RX frequency remained small (probably about 8). I have tried numerous

I would have a look at the pinned posts in the group archive. Roger G4HZA

I find the same when decoding many FT8 stations in a cycle. Was similar in prior versions of wsjtx Pc W10 dual core, 2.2GHz 4GB ram and only running wsjtx with rig control. On FT8 signals Not

I have had this happen too. On 2.2.1. I think sent by my LG phone

A couple of times I have seen that some stations are not decoded until decoding of the next period starts. I have seen two stations at a time, but I can't rule out that the number varies. The stations

Sometimes when I have given up a QSO and started another one the first station comes back with RR73. If I then double-click on that message my station also sends RR73. Is this intentional? I would

Glad to know it worked for you Gary . Maybe I’ll see you on 40 of I don’t see you on ALE frequencies . Andy K3UK.

Andy, I just worked N4AU on 40m FST4, using the frequency configuration you mentioned. That's brilliant. Until something permanent can be agreed upon, perhaps we can try FST4 and/or FST4W offset from

Hi Steve, which version of WSJT-X do you have installed? Does erasing the two decode windows fix the issue? If you go to the Windows sound control panel and select the properties of the

I just installed the program on new Windows 10 machine. I've been running it on Windows 7. Install fine, same settings as Windows 7. I find that after an indeterminate period of time, when

Hi, Why not if you note Quick-Start Guide advice: Keep in mind that these are very narrow-band modes; achieving the sensitivities listed in the table requires that oscillator drifts and path-induced

Bill, Thanks, exactly the information I needed. 73, Tom, KM4VI

Hi Tom, see this thread: https://wsjtx.groups.io/g/main/topic/77441544#17339 Sounds like you would want to copy across ALL.TXT and wsjtx.log as well as the key files WSJT-X.ini and wsjtx_log.adi.

I'm setting up a new computer to use with WSJTX software. I'd like to keep all my logging information and if possible configurations that I currently have. I'm sure it's been discussed before so if

We used 7038.6 USB but set transmit at 2000 Hz to steer clear of WSPR signals. We also changed the H/L setting to 2000. . As for higher frequencies, if I can find partners for a test I'd do some

We used 7038.6 (dial) USB but set TX at 2000 Hz to steer clear of WSPR signals . Also adjusted the Top setting to 2000 . Andy

Ive been seeing this issue for some time and it exists in V2.2.2. In fact it goes back to v 2.1. I first reported this (albeit to the wrong audience) back in July of 2019 on

.... And that I had done ... THANKS GUYS! 73 Dwight NS9I On 10/13/2020 7:11 AM, neil_zampella wrote:

Thanks Bill, didn’t realised the issue had be reported. 73 Ken.. G0ORH