Again this problem is occurring. Missing decode periods. I can see the incoming calls on the waterfall but none are decoded. This occurs for several (maybe 3) periods then decodes resume for several

Hi Folks, I had double-clicked the TX1 button to default to TX2 for responding to a CQ... now I need to get back - can someone please advise how to reset the default to TX1? I've double-clicked

I'm on V2.2.2 as well, W10 Pro 10.0.18363...it has happened three times in the last hour and a half!

On Sat, Dec 5, 2020 at 07:20 PM, Joe wrote: I see that the bug that causes WSJTX to suddenly exit state left when in FT4 RoundUp mode is still there. I thought that had been addressed??

I see that the bug that causes WSJTX to suddenly exit state left when in FT4 RoundUp mode is still there. I thought that had been addressed?? Frustrating...

Is your time correct? Bruce - K5WBM

On Sat, Dec 5, 2020 at 01:32 PM, Bill Somerville wrote: [Snipped] I am happy to make a change such that we follow the system region settings for date and time formats in the Log QSO dialog, we would

From: Bill Somerville Sent: 05 December 2020 13:32 To: main@WSJTX.groups.io Subject: Re: [WSJTX] Log QSO pop up date format ...cut... I am happy to make a change such that we follow the system

Decoding has suddenly stopped on this system. Has been running without issue since 2018. All bands. Station consist: FTDX3000 Signalink USB Dell Inspirion Intel i5-6500 @ 3.20GHz, 8GB RAM MS Win10

I never get why anyone wants that:-) Ask someone the date? "5th" not "2020 December 5th" 2020/12/05, December, May? I'm stuck in the past. 73 Alan G4ZFQ

On 05/12/2020 13:55, groups@... wrote: Hi Roger, WSJT-X is an internationalized application and tries to follow system locale settings rather than having user options to set

Check the computer Settings to be sure your Microphone is turned ON. Wanda KK4EGZ

Hi Bill I would prefer the settings for the date and time formats to be configurable or overridden within WSJTX. I say this because I normally have WSJTX installed on a non-dedicated computer and

Hi Charlie, I have delayed responding to this query until a few comments have been added. The current situation is that the WSJT-X log QSO start and end date and time fields use a fixed format. It

This topic will be locked in 24 hours.

I have placed this topic in moderation and will close it without further notice if any further intemperate comments are made. 73 Roger G4HZA Moderator.

I had much the same problem with my FT857 and in the end I found changing the serial port on the PC it was connected to fixed the problem. 73 G3YDY

The format of the date is MM/DD/YYYY in all other applications and in windows. On the main screen of WSJTX, the format is 2020 Dec 05 but in the "log QSO' popup, the format of the Start and End is

I prefer and use in my HRD log the format of 4-DEC-20. There is no question as to what the date is....my 2 cents Neil N4FN

i believe you can change the look of the date format in windows, and the other programs using it should follow Dave Garber VE3WEJ / VE3IE