Neil, Having checked the power saving setting on all USB hubs and made sure they are set to off I restarted all software and left WJT-X running until the problem reoccurred after about 14 hours. There

Peter, Happy I could help in a small way. Best of luck. 73s Bill WA8VIH EL98

https://www.rttycontesting.com/ft-roundup/2020-logs-received/ 73, Don AA5AU

What computer and OS are you using? This sounds similar to problem I experienced. Roger ZF1RC

Winlog32 already has a built in interface to automatically import every qso from WSJT-X. In WL32 go to Options /Logging Interface and enable whichever program you use . I use JTAlert alongside

Just use the logging function within WSJT to send the new QSOs direct to Winlog 32 as you work them - I use it daily. Gordon GI6ATZ

You are using an “rc” version. That is “release candidate” to let the community debug it before it becomes the official release. As a release candidate it times out to prevent people using it

I am using the latest WSJT-X (2.2.2) for FT8 and have enabled PSK-reporter spotting. However, after the first few entries, the reporter stopped showing new contacts. My call is I was doing receive

Hi Web minds, I am running WSJTX on a Mac with a 7300. When I load the program it gives me a message that it is a version that will expire. The last one expired in November and I had to reload a new

Doesn’t the logging software automatically ignore records it’s previously imported. My homebrew software does. It checks the wsjtx_log.adi every minute, if its timestamp has changed it reads it

hi bill i think they have improved a lot over time like a lot of things looking at some of the specs i understand they are a compromise and may be some ups and down, i posed the question to get an

This is a variation on the process I used to use. My process was to copy WSJTX_log.adi to another "work" folder and DELETE all the old contacts from the copy, save and import. It is simpler than it

Bob, Thanks for the info.

I used the one from your earlier email in this thread. -- Hisashi T Fujinaka - htodd@... BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee

Peter, I confess that I hadn't checked the recent specs at the transverter store. I'll need to check them out before I say anything further about them

l don't know of any good transverters that don't cost at least a leg. Unless you are going for 23cm and up (exspensive), I wouldn't go the transverter route. If money is a big issue you would be okay

A well matched antenna is a must. Unless you are dealing with a minor mismatch, you will lose too much power with a tuner. Even if you are running an amp as I do, You will also lose received signal

can't find anything wrong with mixer or settings in wsjtx or playback. at a loss what is happening now. was working OK this AM, suddenly not working and I didn't do anything out of the ordinary Hank

Instead of deleting the WSJTX_log.adi file, which ruins the program's ability to identify countries, grid squares and call signs that you have worked before, you can use a text editor to copy the QSOs

I am having troubles with 2.2.2 and WSPR. Now I find out 2.2.2 does not do WSPR and it is documented .. to be fixed in next iteration. Suggestion is to revert to 2.2.1 good info. -- 73 Bob