Hi Kelly, can you try WSJT-X v2.3.0 RC3 from here: https://physics.princeton.edu/pulsar/K1JT/wsjtx.html or from here:

Yes I did try removing the devices and letting them reinstall, it did not make a difference. I also disabled power management on all USB root bridges in device manager. In terms of devices, I have the

David, if I understand the TS-2000 manual correctly you only need to have VOX turned on for CW mode, perhaps you have accidentally switched it on for SSB as well, the settings

Bill, as I said, I don't remember turning VOX off on the rig to do FT8; it does have to be on to do CW, but I don't remember turning it off to do FT8. I rarely do SSB. I'll just have to remember to

Hi David, using "Settings->Radio->Split Operating->Rig" is always preferred if it works for your rig. The main reason is that it does not rely on critical timing of Rx to

Stand-alone means not the program auto-started by JTAlertX. Using " Rig " stopped the downward march in frequency! I've never used " Rig " with FT8, always " Fake It ". I use VOX in CW mode; don't

Hi David, what is the "stand-alone version of WSJT-X"? Does checking "Settings->Radio->Split Operating->Rig" behave better? Do you have any form of VOX

Kenwood TS-2000X, RigBlaster Advantage, CAT controlled. Tried unchecking TX freq changes; no change. Tried both VFOs; no change. Tried stand-alone version of WSJTX; no change. I can monitor 7.074;

Hi Kelly, if rebooting your PC does not resolve this issue then try deleting the audio devices that are not behaving correctly in Windows Device Manager, then reboot again to allow them to re-install

On 11/01/2021 02:33, David AD4TJ via groups.io wrote: Hi David, which rig are you using and how is it connected to your PC for CAT control and for audio? 73 Bill

Has anyone found a solution to this issue? I am having the same problem. I recently got a new laptop running Windows 10 64 bit and installed WSJT-X 2.2.2 to run my Yaesu FT991A via USB cable (radio

I have gotten it working on receive. It will also transmit. what I did was reverted my pc to an earlier date which reverted back before the last windows update. I have auto-updates turned off. I then

Many thanks to Bill, G4WJS, Jim, NU0C and Reino, OH3MNA for the answer to my question. very helpful and an easy fix. All the best 73, Peter-K8PT

Using the latest rc3 version, with JTAlertX and ACL. Allow TX frequency changes while transmitting is checked. Hold TX Freq is checked. Fake it is checked. Sometimes, when calling a station on an FT8

Bill Thank you for that explanation and the help with the script. I will review it and see if I can make it work. when I am finished operating daily I shut down everything in the shack. I do the

Hi Bill, Thanks to you and Mike (W9MDB) for solving the problem. 73 Walter Jr. PY4ZO Em 10/01/2021 14:08, PY4ZO via groups.io escreveu:

I log to both HRD and WSJT-X. I just upload from the WSJT-X ADI file directly into LOTW. No problem. Chuck AG0W

TLC is default Audio. Microphone is enabled in the privacy settings. Nothing set to mute.

Greetings All, is there a tutorial available, or directions from anyone, to set up rig control for SDR-Console SDR-Radio ? Much TIA ! Paul N8CVW

On 1/10/2021 9:20 AM, bill.neuro wrote: Bill, Yes, that's what I meant by middleman - WSJT - HRD - LOTW. HRD is what I was considering the middleman. WSJT - LOTW would be