If I right click, it gives me a box I can click on to move tx and rx to that point. Don't need a keyboard for that.

Well, it looks like I either have an inadequate computer (it is a tiny laptop, after all) or there's something weird about the way CAT control, etc. works with the Xiegu. I even tried disconnecting

This works nicely in the dark. https://www.tecware.co/phantom I have mine set to a subdued green at the moment. 73 -Jim NU0C "Markku SM5FLM" <marsip@...> wrote:

Chuck... TNX for mentioning this. I never paid any attention to it and it was sitting randomly at the 12:00 position. Maybe it was a problem I didn't know I had(!). 73/HNY, Bob

Thanks Derek , Timing is good never more than 2 hundredths of a second off network time and I am set to USB. I do not see signal but given the deign of FT-991A, I usually have the meter set to SWR and

The delay on the SignaLink affects the PTT Closure.... nothing to do with computer audio delay caused by a bad time sync. Quoting Chuck - KY4CU <k4cay.chuck@...>:

Martin, Is the radio set in USB ? irrespective of band selected WSJT-X uses upper sideband as the default mode of tx and rx, are you seeing any decoded signals on receive ? if yes that would indicate

The delay control seems to make no difference, no matter where it is set. I will check system resources as suggested earlier. Thanks for the help. I’ll report back if I track this down.

Sorry if obvious question: Do you have the "Delay" control on the SIgnaLink set at minimum (full counterclockwise)? Chuck WV8A

Thanks Neil, Laurie nailed it 73 John -- This email has been checked for viruses by AVG. https://www.avg.com

Thank you, I did overlook those boxes All is well now 73 John On 12/29/2020 2:41 PM, HamApps Support (VK3AMA) wrote: Virus-free. www.avg.com

Thanks Bill. I ran only WSJT-X and there was no problem. I have contacted the software engineer for Win4YaesuSuite to see what he comes up with. Thanks for your help.

So am slowly getting there with WSJT and my WSPR settings. I finally got the setting right so that transmit is lighting and locking in and it logged a a number of transmit attempts. On checking the

G’day Patrick, In the connectors setting on your ‘705 check that for Data Mod you have USB selected. That is, that the radio is expecting an input from your USB connection. 73 David VK3DRH

It is not normal. What do your system resources show, RAM used/ CPU used? How is your CAT set up? Does it get any better if you choose to decode one signal at a time? Andy K3UK

I had someone comment that I seemed to be transmitting late, and that could be the reason we were having trouble completing a qso. My results to date have been variable, but I've had over 250 contacts

Two things ... upgrade to v2.16.17 of JT-Alert, and make sure ALL the UDP checkboxes are checked in the WSJT-X settings. It sounds like they're not all checked off. Neil,

On 30/12/2020 6:31 am, John wrote: You have failed to enable the UDP Server "Accept UDP requests" in WSJT-X. See the "Reporting" tab of the WSJT-X Settings. de

Hi Everyone, Just setting up a new win 10 computer with WSJT 2.2.2 JTAlert 2.16.15 Log4OM V1 These all worked fine on the old PC. The problem with the new install is that when decodes from

Thanks for the confirmation Don. Is there any suggested change in my configuration? Or do you know if there is a driver that I need to download/install to get the right codec and sound out to the