I use Voicemeeter Banana. As bill described getting the audio from the Websdr with enough volumne to see it on the screen, well it takes a lot and then, at least in my setup, the display on the end

Bill I did install VAC 4.64 lite and later VB Cable. None of which did show up in the rig list of WSJT-X v2.2.2. Which Virtual Audio Cable is compatible with WSJT-X or how do you bypass this

Hi Jim, where sound card drivers provide a "Stereo Mix" device it can be used but is very limited since all audio sources are mixed together, you cannot easily choose what is

There is often a "stereo mix" device available in the hardware. Windows usually disables and hides it by default. Has anyone tried this? https://thegeekpage.com/stereo-mix/ Disclaimer: I don't use

Vincent Burel's VB-Audio Cable is Windows and MacOS only. VB-Audio VBAN, on the other hand, is a suite of apps that include Android and iOS endpoints: https://vb-audio.com/Voicemeeter/vban.htm This

Hi Dave, if you are happy to try the latest release candidate of WSJT-X v2.3.0 RC3, which is available from here: https://physics.princeton.edu/pulsar/K1JT/wsjtx.html or from

Amos, Various ways here. https://sites.google.com/site/g4zfqradio/connecting-soundcard-sdr-to-computer/pipe_sound_between_sdr_and_decoder VB Cable is free and should work. 73 Alan G4ZFQ

Tom You made me interested in WebSDR so did try to bring it up. Locating the proper virtual audio cable is difficult. Can you recommend a VAC which will connect to WebSDR on one side and to WSJT-X

Well said, Peter. Karl, I was not suggesting it be changed for one person. There are already several affected by this and the FST4(W) mode is new, not even out in a GA release yet. There will be more

Hi Reino. Here are some links to SDR systems. These links and more on my web site .. http://www.maghull-scene.co.uk/radio.htm http://rsgb.org/main/operating/web-sdr-receiver/

Hi Bill thanks for the good questions. I have a Yaesu FT840 rig. the interface is an easy digi really only used for the audio transformers initially. The CAT would be ptt no audio. using 2.2.2 of

On 07/01/2021 23:02, Dave C via groups.io wrote: Dave, what rig are you using? What does your interface convey, i.e. is it CAT serial and audio, or PTT and audio, or just

Hi all. Ive been so excited to built my interface and get started. I am stuck though. I am able to receive through WSJT-X and see all the QSO's going on. when i transmit, the cycle only engages for

Many thanks just what I needed Peter g8afn

On 07/01/2021 22:41, Peter Cleall wrote: Peter, in RTTY RU mode there is a spin box in the middle of the lower part of the WSJT-X main window labelled Tx #, adjust that to

I use WSJT barefoot I made a few WSJT qsos in ARRL RU. I then worked some RTTY using another program . When I wanted to switch back into WSJT I realised I did not know how to set the sent serial to a

We're going through the same arguments yet again so I'm closing this at 1200ish GMT tomorrow. Roger G#4HZA moderator

FWIW ... you send a RR73 .. that's basically saying ... I acknowledge your last, over and out. You shouldn't have to get a 73 when you send that. You send RRR, that requires a 73 back

Yes. I will try it. Thanks for help. 73, Clovis PY3OG

Hello. I think that then we can say that the permission to enable transmission from an external program on CQ messages (Tx Enable) also provides an opportunity to create a robot. Boris Romanov UX8IW