Bill, Ran the file and the program came up and the closed. It was on for maybe 2 seconds. It asked if I wanted to restart it and I did and got the same thing. 73 Jim Quick /

OK - I've reloaded RC4. When I switch bands in WSJT-X, the rig goes to the selected band, back to the original band, and then changes the mode to LSB. If I change to USB, it seems to remember that

Thanks Bill, I was actually working the developer of this feature last week I believe - we were testing some code changes to the RC3 code base and we saw the same behavior. The biggest issue is

Just for giggles, try tapping on your mic in TX. KB8JNE Spell checked by the NSA.

On 27/01/2021 14:12, Paul Ecker wrote: Hi Paul, does the following run in a CMD window give a similar error? dir C:/Users/ecker/AppData/Local/WSJT-X/save/ 73 Bill

In addition to my last email, Once I transmit, the VFO A mode goes to CW, and the IFO mode goes to AMP1 - seems there are some crossed signals. Mark

Hi Jim, OK so you need to kill process id 4093: kill 4093 an delete the shared memory segment with id 524288: ipcrm -m 524288 Then try running the

I wonder what would happen if you made the save folder Read Only? Likely get an error on screen but you might give it a try? Sean KB8JNE Spell checked by the NSA.

Bill - here's what was copied 73 Paul w3eck --------------------------- WSJT-X - Slice-C --------------------------- Error Writing WAV

I'm running an i7 9700 with 16 gig RAM with the latest Windows 10 build. I doubt it has anything to do with the processing power or speed. I cleaned out the save folder just the other day and already

Bill, Here is a copy of what when I ran the terminal command, log, and screenshots 73 Jim Quick / N4ULE jimn4ule@...

Hi Mark, you appear to be suffering multiple issues, let's start with the "selecting incorrect modes" one first. What do you have checked in the "Settings->Radio->Mode" panel, what is happening that

Hi Jim, OK, you need to kill the jt9 process that is getting left behind and delete the shared memory segment, then try again. Run these commands again to get the details:

RC4 is not controlling my FTDX-3000 properly anymore. Primarily issue with VFO control but it's also selecting incorrect modes, not operating Split mode properly as 'Rig', and switching to VFO B when

Bill, Run the File and nothing came up but two errors. Here is the log file and two screenshots. 73 Jim Quick / N4ULE jimn4ule@...

I am running v2.2.2 and when I look in the SAVE folder, there are NO wave files. I have never used the Delete option. I just installed this in Nov 2020 on a new PC running Windows 10 I7 processor with

Hi Rick, so I can see what is happening please put the attached file into your WSJT-X configurations files directory which is the same as the log files directory on MS Windows ("Menu->File->Open log

Hello Bill, many thanks for your advice -“spot on” if you’ll pardon the pun! The Norton firewall grabbed the program and excluded it. All fixed and working again. 73 John

>One thing to check, what position is your TX offset within the passband? If you are right on top of the edges of your rig’s filters, I could imagine power bouncing up and down. Hi, If CAT

One thing to check, what position is your TX offset within the passband? If you are right on top of the edges of your rig’s filters, I could imagine power bouncing up and down.