On 02/02/2021 20:28, Jacques Pecourt wrote: Hi Jacques, the Meinberg NTP client installer suggests you select pool servers from the pool.ntp.org project, using pool servers

The question remains, why should I upgrade? Bill W5EC

Hi Bobby, "Menu->File->Open log directory" 73 Bill G4WJS.

Jacques, My Meinbert NTP stopped working completely until I updated it...apparently they just had an update or mine was behind. Either way, as soon as I did the update it rebooted and started working

Bill, where is the log files directory? Don't find one. Bobby/N4AU

I installed and used NTP Meinberg a year ago with great success until something new occurred recently. Basically my setup takes forever to reach the "377" mark . It used to be a couple of minutes in

Hi Kari, I noticed you said that others are not having this issue, I just checked, and I had 57 GB of .wav files, which are now deleted... Can someone direct me to the control which turns off, and

As many others Kenwood TS-2000 users I was trying to find a solution to reduce the number of cables between transceiver and PC. Audio i/O, FTDI for ACC2 PTT, serial for CAT. If the TS-2000 had the

It's in one of the pinned posts in the archive David. Roger G#4HZA

I downloaded and installed - smoothly - v.2.3.0 Win 64 bit (from v.2.2.2.) I found that differently vs. v.2.2.2 the colors in the Status Bar for FT8 and FT4 are NOW *very similar*. Is there a way to

Hi Mike, thanks for the issue report, those images need some updates, along with the text. We will get that sorted out for the next release. 73 Bill

On 02/02/2021 18:25, David Ross wrote: Hi David, put the attached file into you WSJT-X log files directory then restart WSJT-X. 73 Bill G4WJS.

Hi Andy, there will be conflicts if you have something from a repository using apt/aptitude/synaptic installed and then try to install our bare Debian package file. To get the

John, So have most of us. I wonder why no-one else has reported this problem... Only that for everyone else this button (?) seems to do exactly what is advertises. And certainly not by WSJT-X. Why

Ken: I don't have an exact solution to what you are asking. What I do with two instances is that I have two tiny computers attached to each their own rig. Occasionally, I manually produce a master

On Thu, Jan 14, 2021 at 06:36 AM, Bill Somerville wrote: rig to power upHi Bill can you please tell me were to enable rig power up in ver 2.3 Many thanks David Gi4sna

Hi Bill, I tried downloading the wsjt installer .deb file and having the debi installer install it but always just came back installing only message aggregator alone. I

Hi Bill In case you are unaware the user guide for 2.3.0 shows the old Tab 2 still in place. It is shown in section 6.4 and 10.5 (where there are instructions on using Tab 2). Both also appear in

I usually run two instances of WSJT-X concurrently (FT8). I often swap the bands on which each instances is operating in order to swap the (mutually perpendicular) antennas fed by the radios driven by

Thank you for the detailed explanation Bill! I hereby rescind my bug report.