See message #5209, #5203, #4585. Edd KD5M

Yes sir - the dummy load I used earlier today did indeed stop the disconnects. I just don't understand what I have changed when moving from one location last week to another this week because I used

Hi Jason, When I spoke of the ferrite, I was of course speaking about the external battery cable. You should try tx'ing into a dummy load & see if any rfi goes away. That's the one potential issue

In my original email I mentioned that I have already added 2 ferrites to the shielded USB cable. After doing that, it did indeed help the problem to happen less frequently, but it still happens. My

just after sending the first message... checking multiple other computers here and one did indeed generate several thousand files recently... and save remained set to NONE.

I was one that mentioned this issue a week or more ago.....have upgraded to the latest ga as well. Mine is always set to NONE and it has never changed. But the files do get saved on occasion.... but

Hi, Several days ago someone, (I forget who), complained about thousands, and thousands of files being saved in the File->Open Log Directory->Save directory. This prompted me to check my setup, I

If you look on the groups.io Icom IC705 page, you will find RF Interference via the USB port (poorly shielded cables) well described. That RFI disrupts the CAT control. Edd KD5M

Sometimes the first transmission after "Enable Tx" is activated does not produce any audio output to the radio. The "Tune " button does not always produce a tone Sometimes turning "Tune" off starts a

...and even though it is only 10 Watts, it's probably a good idea to install a ferrite on that power cable; whether it's a battery or power supply. 73 - John - N7GHZ

The IC-705 runs on its own battery, but it also takes an external battery connection, which provides it with a 10-watt output, as opposed to the 5-watt output of the internal battery. This issue

Just updated WSJTX from v2.2.1 to 2.3.0 flawlessly with Win10 Pro 2004 64bit, so first many thanks to the devloper team for this new GA version! I do very appreciate the frequency marker beside the

I use QRZ.COM for my logbook. I upload my WSJT log to QRZ every day. My question is should I remove my contacts from my log file after I upload them or just let the log file keep getting larger. 73's

Hello all... Please add me to the list of those who lost the USB audio. I've looked through all the #audioissues and not found one that relates to what I'm getting. Its and "Error in Sound Input"

I have been running ver 2.2 with up to 6 instances while sharing 2 com > ports on 2 radios (FT847 & IC9110) with 2 rig blasters for years. This > way I could monitor ft8 & MSK144 on 50/144 & 222

That fixed me up. Thanks Bill 73 John N9ZL On 2/7/21 11:51 AM, Bill Somerville wrote:

Hi Jason, thanks for that. It looks like you have an RFI issue or something else that is interfering with your USB connection to the rig. After WSJT-X sends the CAT command to

Sent Jason Johnston KC5HWB, Ham Radio 2.0 817-601-7228 jason@... www.HamRadio2.com

On 07/02/2021 22:46, Jim Brown wrote: Hi Jim, probably not. Es propagation is normally fairly strong but brief. The attributes of FT8 include narrow bandwidth, multi-signal

Hi Chuck, I assume you are referring to the way of recalling stored free text messages on the old Tab 2. Nothing has changed, just use the drop-down list on the Tx5 message to recall them. Also as