Yes Lance, I saw it some days ago. As well as you did in Q65_120A mode. I restarted the program and it was gone. 73 de Christoph DF9CY

On Thu, Feb 25, 2021 at 06:08 AM, David Ackrill wrote: I have two shortcuts for my TS2000X, one to run V2.3.0 and the other to run V2.4.0-rc1. After the diversion into setting up clones for

Anybody else having this problem?  I started having it yesterday and it seems to be happening quite a lot tonight   VY 73, Lance -- Lance Collister, W7GJ(ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8,

On Fri, Feb 26, 2021 at 03:51 PM, Bill Somerville wrote: if it is checked then the last used frequency in that configuration will be selected AH! That was the bit that I did not understand! I thought

Bill, Was, or was suppose to be, running via CAT control. No other programs using PTT on the rig except for the mic PTT button. It was run as CAT for a couple of years and was that way on the config

On Fri, Feb 26, 2021 at 12:09 PM, neil_zampella wrote: Close the program, then reopen. The program will create a new .INI file. Enter all the audio and rig settings, make sure it works fine in

On 27/02/2021 01:00, Joseph Hurd wrote: Joseph, an error log with hundreds of errors is not much help, if we need an error log we would normally provide a specialized log

Bill I had reported the gist of both errors before: Rig.C(1286): Rig_get Freq return while getting current frequency and "Rig_open return while opening connection to rig" As I have resolved the

Joseph, we need the full error message including the details. You don't have to copy it manually nor take a screen capture. When the error message box pops up just hit Ctrl+C and the whole message

It's fixed - by regression. Tried installing latest WSJT-X 23.0 on another, new [1 week old] PC. Same rig, etc. Same issue - no comm error or "Rig_open return while opening connection to rig" error.

https://europeanft8club.wordpress.com/ If you ever find any results from previous years, let me know. You may have to look into their WOM. 73, Ken, AB1J

Something even more strange is happening now. The 'Default' option under configurations has dissapeared! https://www.dropbox.com/s/6y32lwoile17mnv/Default%20Gone.jpg?dl=0 I'm sure that I didn't

Open the Windows SETTINGS app, then select Privacy. Its located there. Neil, KN3ILZ On 2/26/2021 5:00 PM, Grady Hawkins wrote:

Tell me about contest, haven’t seen info. Where can I find the particulars? Tnx

Both my audio in and out are set within Windows to my default audio devices for windows which are both Realtek. Grady KF5KZX

On Fri, Feb 26, 2021 at 03:51 PM, Bill Somerville wrote: the frequency you get when you switch to a configuration depends on the "Settings->General->Monitor returns to last used frequency", Hi again

I'm going to upload some dropbox images to show what is happening, This is in V2.3.0. OK, so I set up two configurations. The 1st was JT65b on 50.310MHz saved and named "JT65" the second was FT 8 on

On 26/02/2021 23:41, David Ackrill wrote: Hi Dave, the frequency you get when you switch to a configuration depends on the "Settings->General->Monitor returns to last used

On Fri, Feb 26, 2021 at 12:09 PM, neil_zampella wrote: This may be a drastic move, but take screen shots of all your rig and audio settings. We're going to reset the .INI file. Open the WSJT-X log

On Fri, Feb 26, 2021 at 12:17 PM, Bill Somerville wrote: it's not that simple. The working frequencies tables for every configuration have to be read into memory at application start up, that can only