Running Ver 2.6.0.b15b07. When I generate standard messages and the other station's call ends in the letter A, that call and my call (AA1QD) are run together in the standard messages. Using font

I'd like to see some debug info about this problem. Please place this file as described belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0

C:\Users\[username]\AppData\Local\WSJT-X\WSJT-X.ini Also wsjtx_log.adi if you depend on the local log instead of a logging program. Just have to run WSJT-X once on the  new computer and then copy

Howdy, I don't believe F/H mode works with FT4, only FT8. If you were seeing multiple streams from the DX in FT4, he's running MSHV. See https://www.dxmaps.com/FT8_How.html. MSHV is another

Yes late yesterday they were ft8. When they first came on only ft4 would decode in 7.5 sec cycles with them putting out 2-3 signals. I did a quick scan and see back in 2021 they ran some ft4 f/h last

The WSJT Development Team is pleased to announce that today the Solar Flux Index is 234 and Sunspot Number is 195. Oh, yes: and the WSJT-X 2.6.1 General Availability (GA) release is now available for

both times I have worked them, yesterday on 12m and this morning on 10m, they were running FT8 Fox/Hound. definitely NOT FT4. Jim N1NK

Thanks much Dennis for the reassurance.. I was only thinking of FT4 since it is a bit faster. Dave KC3AM

If you are using a WIndows PC and you have had any updates, Go into your device manager and verify your ComPort assignments. It is not uncommon for Windows Updates (Patch Tuesday's) to corrupt,

Everything worked fine in WSJT-X from the time I setup, January 5, 2023, thru January 15, 2023. Today, January, 16, 2023 I'm getting no output from WSJT-X on transmit. Nothing was changed, no

Hi Bill, Install wsjt-x into your new computer. Don't do any setting at that time. Locate your Log directory in your old PC and copy files: WSJT-X.ini - the configurations wsjtx_log.adi - your

You have to copy the directory c:\Users\[your user name]\AppData\Local\WSJT-X to the new computer AFTER INSTALLING WSJTX INTO THE NEW ONE. Pay attention: to avoid any problem install the same version

The popularity of JT65 has drastically declined since the introduction of newer modes, especially FT8 and FT4, but also Q65 and FST4. A study of WSJT-X doc will show the advantages of the newer

Hi everyone. I've been using WSJT-X for a few years now, but yesterday I purchased a new computer. I would like to copy all my configuration details to the new computer so I do not have to reconfigure

I see the same behavior on my MacBook pro. When I start WSJT-X, I get the rig control error, press OK, press Test CAT, it goes green and all is well. This behavior simply appreared one day in the

Further, if you can't access the on-line document use the local copy that is installed when you install WSJTX. Help -> Local User Guide *However*, if you have installed the release version of

Hi,I can decode FT-8 and FT-4 but no JT65.Is there something I need to set in order to decode this mode?I didn't see anything in the manual except 2 or 3 setting which I did.Maybe restarting the

Doing it the way you are works fine. Another way would be to create a new instance of WSJT-X using the rigname parameter. That would give you a new isolated folder tree with its own log file. I've

Dave Yes, the program will create new files when next started. Outside of 40, 20, and 16, I find FT4 activity limited. Dennis W1UE verizon.net@groups.io> wrote:

Hello everyone, I am preparing to operate FT8 this week as W1AW/3. I would like to make a separate log file, W1AW/3, to make things easier. I do not see a way to open / create a new log file. I