i feel we must try and stake out a small section of the ether for our ops. the section must be as far as possible be good in all regions. will start a poll soon after we get more

Enter your vote today! A new poll has been created for the WSJTX group: just to make it easy, poll will be by band with usb dial as center. what is good freq for 160m. keep in mind the itu regions

Nice to see the group get started. Russell NC5O " IN GOD WE TRUST " " Skype-Russell.Blair "

2330Z cq on 1839 @ 1300hz audio....if qrm gets bad will move higher. david/wd4kpd up to 500w and hygain 18ht vert -- God's law is set in stone..everything else is negotiable.

David, Thanks for my 1st JT9-1 on 160M and only my 2nd QSO on the mode. Fun 73 de Ron W4LDE On 11/8/2012 6:21 PM, David Michael Gaytko //

2300z on tonight with jt9-1 1839.5 @ 1300hz audio -- God's law is set in stone..everything else is negotiable.

Just on JT9-1 a short time but in 2 nights of listening much above 1838 plus 1500 hz is useless here. Due to a local noise. About a half dozen in the log so far on 160 between 1838 plus 1400 and 1600

Hi Andy, After you use JT9-2 for a QSO, JT9-1 seems fast. There is some activity on 14.078, I made a few contacts there. 73, John - kc2rxs On 11/9/2012

John - Nice working you. Yes JT9-2 is Sloooow...! I will check out 14.078 next week. WAE RTTY this weekend so that part of the band will bee useless I am sure, Likely do some more 30 tomorrow.

30m Band Utilization Chart update: 10 November 2012 http://homepage.ntlworld.com/wadei/30m_band_utilization.htm -- 73 Ian, G3NRW The 30m Band Utilization Chart:

On 09-Nov-12 ve9dx sent, on a straight key: Hi ndy. I would guess that the limited number of us initially on JT9 are struggling to find openings in the segments of each general JT65 area. You local

I have been calling CQ on 1839.5 +1300 for a few nights. I get hammered and hammered by JT65 which comes up there and directly on my signal. KB3X has done this lasting as long as 45 minutes. Is there

Bob, I listened last night on 1838 and 1835.5 most the evening and never heard any JT9. I'll check 1839.5 after a while tonight here in the West. See if I can hear anyone. Is anyone on 80M? Where? On

hello down under... i would be most happy to do some wsjtx on 160m. most any time welcome.... david/wd4kpd -- God's law is set in stone..everything else is negotiable.

I am on 1.3895 now. I'll be there for a while if you can make it. Tom KJ4QDZ

Assume 1839.5 kHz dial freq. I'll be around after about 0400Z. Thanks. --W1XT

Hi all. I regularly use JT65 on HF and VHF. Of course, I turned immediately in testing new Digimode JT9. Unfortunately I do not have an antenna for 160 meters, so try to do the 3.5, 7, 10 MHz. Two

Hi Andy, At least we finally made it on 30m. There is still just a few of us, so I'm sure that activity will improve in time, as Joe gets the software really singing, and more individuals have a

Hi Ian, G3NRW. This is probably one of the most useful documents produced by anyone, including national societies, etc., Thanks for all your efforts in producing and maintaining the

the 160m qrg poll is coming along ala-bit slowly. so far 1839 & 1839.5 are most popular. i suspect this is because of the qrm from jt65. will be closing poll by the holiday, so please vote. the