That's ok; it isn't working either. Keeps saying it's not an executable, etc. Never mind; I guess I'll just give up on ever running DXpedition stations, or having auto-band/freq connections. I am

Layne, do not run utilities that are going to delete files in the temporary files area while programs that are running are using them. 73 Bill G4WJS.

John, it is using a Hamlib test program to open a connection to your rig and to send a fundamental query command to get the current VFO frequency. It will do the same steps

Well I downloaded the 64- bit version of 2.2 and i get an error message on start-up : wsjt-x: ENTRY POINT NOT FOUND. (attached) I close it out, get the same error message the 2nd time, close it out

Hello Bill, Tried from CMD and nothing returned C:\WSJT\wsjtx\bin>wsjtx C:\WSJT\wsjtx\bin> When running from command prompt, no wsjtx.exe running in task manager. I have the cursor back

Hi,I have a problem with 'rigctld-wsjtx' using wsjt-x 2.2.0-rc1compiled from sources on Ubuntu 18.04.4 LTS.Radio is an ICOM IC-7300. Rigctld is started with command "./rigctld-wsjtx -m 3073 -r

Hi Walter and Haris, can you try starting WSJT-X from a CMD prompt as follows: C:\WSJT\wsjtx\bin\wsjtx and see if any information is printed? 73 Bill G4WJS.

Hi to all, The same here with 2.2.0 RC1. Tried with two different computers and I have exactly the same behavior. wsjtx.exe is running but no window or taskbar icon appear. Only visible in task

Hi there, no it is not JT-Alert. I think the program is just checking the the first 4 characters of the call sign to make a match 73 Geoff ZS6C -- Geoff Levey PC Panic cc ZS6C (WAZS 900) DXCC

The good news is that the USB ports are good. The bad news is why is it not showing up as a com port? I have a had lot of problems with USB ports and wrong drivers but this is a new one! Have

What feature are you trying to enable by using "Enable VHF/UHF/Microwave features" on 6 meters? The nattering message that seems to be annoying you is asking, in effect, "Are you sure you want this

Jim, I'm using WSJT-X 2.2.0-rc1 with JTAlert 2.16.5 and everything is working fine here. No problems with logging to Log4OM. 73, Jim N6VH

Hi Rick Do you have that option set on 6m? Generally not needed on the lower VHF bands unless you are into EME and the likes. Tom -- 73 Tom GM8MJV (IO85)

And as Icom instructs ... install the Icom USB driver *before* connecting the transceiver. To avoid problems in the future, disconnect or turn off the Icom transceiver (also applies to Kenwood which

Try Goggling IC-7610 SuperSpeed-FIFO Bridge: The communications are done through FTDI's "D3XX Driver." You need to install the driver (USB I/Q Package for HDSDR) that

Problem: Extraneous display of popup window with message: 'VHF features warning.... VHF/UHF/Microwave features is enabled on a lower frequency band. This situation is not limited to just the two

A suggestion: Go to the ICOM web site, find and download the Silicon Labs USB driver for the IC-7610's serial ports and install it. Don't use the MS driver. 73, Rich VE3KI

See https://groups.io/g/WSJTX/topic/status_file_error/28767704?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,28767704 Whitelist that file. In Windows, the application may be locking it or

Hi Jerry, Thanks for your help. I plugged in a flash dive, the laptop (LP) gave the audible connection sound, but no COM Ports were showing in the Device Manager. Did the same with IC 7610, got the

If the com ports are hidden in the device manager that means that the device has not been detected. I would suggest: 1. Try a different USB port 2. Try the device on a different