Have you tried to RESET the Frequency list? Neil, KN3ILZ Virus-free. www.avg.com

My JTAlert used to log directly to ACLog.. buy I had a disk crash and now that I have everything back up and running JTAlert will no longer write to the ACLog even though it says to do it in the

Hi Glen, if I'm understanding your 'problem' correctly then I suspect you might be expecting something to happen that isn't part of what WSJT-X does, and also that you might have problems with your

Recently, when I switch mode from FT4 to FT8, it doesn't work. I have to go into the band window on left and pick 14.074. It then switches as usual. It works fine switching back to FT4. I'm using

Ditto. And I enjoy telling my friends about it. They chuckle too. 73 jerry km3k Sent from my Samsung Galaxy smartphone.

Kai, you are absolutely right. Reino, thanks for quoting Bill's email on the subject. To all, please pardon my unnecessary intrusion. Several years ago I received instructions advising to make the

Great thinking outside the box Steve! I must be getting slow in my old age because I didn't even "see" that when it was right there. The absolute best answer I have ever seen in this group. A little

Hi Jim, the recommendations for setting up Rx audio to WSJT-X are as they have always been. Adjust the output level from your rig such that quiet band background noise indicates 30 dB or a little

On April 3, 2020 at 10:05 PM Herb Blue <WB8ASI@...> wrote: Hi Glen, Trying to understand your problem. Doesn't quite sound right. Are you a new user or are you seeing something

Hi Glen, Trying to understand your problem. Doesn't quite sound right. Are you a new user or are you seeing something different from what you're used to? Everything seems to be pretty automatic.

About half way down on the lower part of the screen (to the left of the Call 1st check) is a check box for Auto Seq. Make sure that is checked. Monty, NR0A Jwilson16@...

Thanks to those who replied, More Data: I do have my "Hold Tx freq" Checked, and on a clear spot. What I find is that I'll see a station call me (Red Bar), but then after I reply with my report to

Bill, Thanks for the suggestions I will tackle the task after dinner. But it sounds very hopeful! I will followup with you in a bit. Thank you! Howie WA2AGA

Hi Howie, I'm not sure why you have chosen to reinstall the virtual COM port driver when you clearly have a problem with audio to your rig via the USB connection. Not really

Full time no audio to IC 7300 after windows 10 update to version 1909, CP210x removed software driver and reinstalled. No help. Comports disappear next start up. Subsequent restarts and reboots

Hello All, First of all, let me say a heartfelt thank you to the development team of the WSJT-X software. I enjoy using it. Secondly, it is quite possible

The problem with this is that the motherboard sound chip is only available if something is attached to it. For audio output at least I have an hdmi monitor, but I have no mic connected for input. So

Not true. Your WSJT-X will decode all stations within the limits of the 'Wide Graph' lower to upper frequency. You do not need to QSY. :-| Chuck

>I am finding that when I am called or answered by a station that my Rx frequency is not moving to their Tx frequency, thus I do not decode them. Glen, The decoding of an answering station is

Do you have the "call first" box checked? I may be mistaken but believe that is the only way you automatically go to the calling station's freq. Mike / W8DN