Brian, Something is really wrong. Why are all your UTC times showing as 000000? 73, Carey, WB4HXE -- 73, Carey, WB4HXE

Phil, Thank you for your feedback. As far as I know the Language Fonts is set properly. I have looked to see if there are any additional settings but can not find anything. If I am missing something

K0PIR has a video on YouTube (https://www.youtube.com/watch?v=j-2iDCkWQA0&t=630s) that goes over the settings for the IC-7300 and it’s very useful. I echo what others have said in that how you set

Getting things ready for the 144MHz and 50MHz RSGB contests (last minute, I know!). These are two simultaneous contests and are using the EU contest mode in WSJT-X. For each contest the serial

Hi Mike. If you want to control more than WSJT-X does, you can use one of the options like "DXlab Suite Commander", "FLrig FLrig", or "Ham Radio Deluxe". then you can control the radio through the

They look like Arabic numerals to me. What have you got set in your international settings on W10? 73 and keep safe, Phil GM3ZZA. Sent from Mail for Windows 10

Also keep an eye on memory usage. If that gets to 90% or so then your programs will start swapping in and out of memory. 73 and stay safe, Phil GM3ZZA Sent from Mail for Windows 10

On 31.3.2020 14.50, Dave_G0WBX via Groups.Io wrote: After copy command the files should be - and they are - equal. 'Kari

Re:- ..why not just use 'informal' way of copying the single instance WSJT-X.ini?Open a command prompt in the configuration directory ~/.configand issue the magic 'cp' command, for example:cp

I installed WSJT and am having a problem with unreadable font in some of the text boxes. I have searched through the messages and cant find a similar experience. I apologize if I missed something. I

Steve, your observation that "I notice that the power out drops if I change the transmit power, too." doesn't make a lot of sense to me. Can you clarify please? 73 Bill G4WJS.

Hi Mike, WSJT-X sets the minimum of rig settings needed to get on air. You can control this by options on the WSJT-X "Settigs->Radio" panel. The "Mode" options control how the rig mode is set, for an

On 31/03/2020 01:58, Scott Rosenfeld wrote: Hi Scott, this post details how to set the Tx audio levels with WSJT-X: https://groups.io/g/WSJTX/message/5077 Note

Hi Al, Looks very much like CPU load is going to 100%. You should do the following. (1) Monitor CPU load continously with task manager or with tools like System Explorer. Likely decoding stops when

I've seen this for a long time too. Thought it was something that WSJT-X was doing. I notice that the power out drops if I change the transmit power, too. Went through the user guide and there's no

Is WSJT-X 2.1.2 supposed to control all aspects of the ci-v control or just the frequency?. My ic-7300 only respomds to the frequency and if wsjtx is supposed to set the mode et. al., its being

Secondly, anyone know if a Windows restore would do the trick? Lastly, anyone have a solid TS590SG set of configurations for a setup with Signalink that might work? I have tried a variety

Just came across your query and in my experience IF you indeed made and still possess a complete back up of windows following directions you should be able to get back to where you were before your

Dave, On 30.3.2020 22.35, Dave_G0WBX via Groups.Io wrote: ..why not just use 'informal' way of copying the single instance WSJT-X.ini?Open a command prompt in the

Somehow my WSJT-X audio level to the radio is screwed up. It was working fine as of Thursday / Friday. Windows 10. FLDigi drives it fine, as always. WSJT-X, even with the slider at full, gives me