-- Anthony Luscre K8ZT Ohio Section Section Youth Coordinator & Education Outreach ARRL - The National Association For Amateur Radio™ k8zt@... (best for Amateur Radio) The Web Resource Hoarder-

Thanks all for the support. Yes, it turns out that the very active window on the installation that works, is responding to the built in laptop mic. I shout or whistle, and it goes crazy. Did it

Set the K3S up for Digital Analog, following instructions in the manual. Then study and follow the instructions in the WSJT-X User Guide. Make sure that you have the latest version of both the program

Hi all, Many thanks for all the replies. I have gone through and checked every setting and changed over to USB CODEC for both input and output audio. I have also rechecked the ALC setting. Now it

Hi, at present i have an issue with the startup. If i run my wsjtx 2.1.2 64bit on my win 10 (home), the startup canceled without an error message. What happend before: - I have installed wsjtx and it

Well, you are absolutely right about 1 thing! No solutions to fixing the greyed out "Transmit Audio Setting" box! Everything else is set the was it should be and my Com Ports changed initially, but

Thanks! I'll send this to him. Would go in person, but COVID-19 has turned the world upside down. He's also in the high risk age group and has other health issues. 73

Make sure the K3 (or K3S - they operate the same way) is in DATA A mode. With the K3 in DATA A mode, check that the MIC SEL is set to LINE IN, and check that the MIC gain control is not set to zero

I'm asking this for a fellow ham that isn't on this list.  He is having trouble with getting WSJT-X to work with his K3S.  I know I've seen mesages in the past about how the K3S needs to be

Hi Art, if you are using MS Windows 10 then make sure you have allowed WSJT-X access to microphone devices in the Windows Camera and Microphone Privacy settings. 73 Bill G4WJS.

Carl, The radio is turned on. 73, Art WB4MNK

There's a companion program "hub4com" that will you split the port. 73. Carl - WC4H

On Wed, Mar 25, 2020 at 12:30 AM, K7RA Tad Cook wrote: "For instance, right now I am not at the radio and on another computer, and when I run WSJT here with no audio input, that Receiving window acts

Art After entering the settings you list and restarting it should work. If not there is another problem. My comment was from the fact that you just installed and got that error. I

Is your radio turned on? 73. Carl - WC4H

Guys, sheesh, 90% of these "soapbox gripes" posts do nothing to answer the OP question. Possibly someone needs to start their own topics like "OS gripes" or "Covid-19 frustration" to lessen the

Roger, Thank you for the reply. How do I setup the sound card input? In the audio tab sound card is showing Input: Microphone(USB Audio CODEC) Output: Speakers(USB Audio CODEC) I am using Windows 10

Dave, I think the portion beginning "One of Windows most annoying habits... " should be required reading for anyone using Windows with amateur radio apps interfaced to a radio and/or

Check out gridtracker. I'm not a contester by nature, so this fit the bill for me. It logs LOTW automatically, but it also give beam heading and grey line map. Just a very good utilitarian

So back to my WSJT deafness problem, I have no reason to assume that it is related to an OS update. Tad, Have you tried to rename or remove WSJT-X.ini file, when you re-installed wsjt-x? In some