Last night there was a DX station on 160m FT8 FH that I needed. The problem was that he was calling on 2nd sequence (odd) and answering on 1st (even) rather that 1st sequence. He seemed to be working

I had been using D4. However, a few weeks ago, I started having decode issues, even though the clock looked good. Not very scientific & on a whim, I switched to Net Time & found steady decodes

Herb, THANKS FOR THE REPLY. YOU MAY HAVE POINTED ME IN THE RIGHT DIRECTION. I USE DIMENSION-4 TO SYNC THE CPU. I THOUGHT I FOPRCED A SYNC LAST WEEK JUST NOW OPENED D4 AND CLICKED ON “SYNC NOW”

Hi Radi, try starting WSJT-X at the top of the minute, that should give you time to get into the setting screen. If you can't manage that then you can edit the settings file directly,

Hi Bill, I can't even access the wsjt-x settings because of this warning window that stays on! I think even if I could then log can't be logged neither as it will look for the path to user Radivoj

Hi Radi, you need to go to WSJT-X "Settings->Audio" and change the path to save .WAV files to reflect the new user id you have somehow set up. 73 Bill G4WJS.

Hi Rich, I have another problem now: something happened in Win10/64 and now my wsjt-x log and other applications that were under C:/Users/Radivoj/Appdata, now appear under modifier Username "radiv"

Not sure I can easily test this for you as I do not have 2 antennas hooked up and I thought the antenna 2 jack on the 1200 was receive only. But I bet if you use Flrig it will solve your problem. I

Hi Greg, some Yaesu rigs CAT commands allow the frequency to be set directly or by first selecting a band then selecting a frequency. Unfortunately the results cam be different. When selecting a band

I have an Yaesu FTDX1200 and use it and most bands FT-8/4 and all works well except for one glitch. When I band-switch to 6 meters using the band selector on WSJT-X, the antenna stays on antenna #1

Great only if the products are on the shelves… At Safeway this evening, even the bread and milk shelves were almost bare. Bill WB6JJJ

Reboot the computer and check Device manager to ensure com and audio settings match what is in the software. I have never seen a need to uninstall/reinstall WSJT-X. de W4WNT

Is you clock running exact?

I HAVE USED WSJTX SINCE 03/31/2019 WITHOUT ANY PROBLEMS UNTIL MY RADIO HAD TO BE SENT TO YAESU FOR REPAIR. WHEN I GOT IT BACK ALL MODES WORKED (CW-SSB) OK EXCEPT WSJTX. I HAVE BEEN TRYING TO MAKE

Hi Craig, that's not the usage message from the v2.1.0 wsprd, looks like you have some old version of wsprd. 73 Bill G4WJS.

Hi Bill, I am getting the following... pi@raspberrypi:~ $ /usr/local/bin/wsprd -h /usr/local/bin/wsprd: invalid option -- 'h' Usage: wsprd [options...] infile infile must have suffix .wav or

The very first thing to check when not deciding is your system time by going to https://time.is

HI F IROM SEATTLE HAVING TROUBLE WITH DECODING . TEST FUNCTION PROPLEY AND AUDIO CODIE IS GOO AND TRIED RE STALLING WSJTX ANY IDEAS WHAT MY PROPLEMS IS

Is there a way to create a custom wave file for JT Alert?

https://www.youtube.com/watch?v=UXlsNdRel3Q John VE3KKQ