Hi Greg. I have also noticed that FT4, while being less sensitive, is great for combating QSB due to its speed. I have seen more FT4 activity on 40, 30 & 20 FT4, but, like you, I wish there was

Hi Alain, on the IC-9700 the AF output level over the USB audio connection is controlled by the rig menu setting "SET->Connectors->USB AF/IF Output->AF Output Level". It is best to have all other

Hello, I should have been more attentive and read the manual, adjustment by the sound card without any problems and switching to 48k on it. cordially, Alain

Bonjour cher OM, merci pour votre réponse, j'ai changé de version de wsjt-x ,pour la 2.1.2 la il n'y a plus de curseur pour le reglage du niveau je pensais a une astuce wsjtx ,

Bonjour... Vous avez bien une carte son quelque part entre le récepteur et wsjt-x. C'est là qu'il faut régler le niveau BF. Evitez de prendre la BF sur la sortie HP, prenez la

Hello, I'm new to wsjt-x and ic-9700. W10 -64bts currently wsjt-x 2.1.2 works perfectly. The current reception setting on wsjt-x indicates 70db. To modify the reception input level in wxsjt-x how

Thank you for all your assistance will check out suggestions next time I have the computere up! Best Regards!!! -- Marty Tressell, K0BBK mtressell@...

On Wed, Mar 4, 2020 at 08:06 PM, Dave S wrote: I've had the same problem. Seems like the last time it happened, I tried lowering the RF Gain and it started decoding every sequence. I wasn't getting

Whoops, that should have been N3FJP.

If you use Ham Radio Deluxe or N2FJP loggers, you can set WSJT-X to simultaneously log into those programs which gives you a real-time readable log. You can then send your adi file to LOTW.

You can read the file. It should open with a text editor. Right click the file and select “open with” and select a test editor on your computer. That is generally notepad on a windows computer.

I have run WSJTX on different computers and have moved the contacts into WSJTX.log from secondary computers to the primary computer. Since I can't read an .adi file i am uncertain if i upload

Thanks Neil, I'll keep an eye on the save folder. Paul, W5PF On 3/4/2020 6:57 AM, neil_zampella wrote:

I've had the same problem. Seems like the last time it happened, I tried lowering the RF Gain and it started decoding every sequence. I wasn't getting high readings on the level meter at the time 73

Ryan, the WSJT-X call "Lookup" button searches in previously stored entries, saved by the "Add" button. The retrieved data is the grid square. The functionality is designed for EME and other VHF,

Hi Buddy, I have a similar problem. When I start WSJT-X it will only decode half of the cycles. After about 20 minutes it settles down and decodes all. Then, when I try to answer a CQ, it will stop

That's why there are DX Clusters, and third-party programs that will do that not just for FT8 modes, but SSB, CW, etc. Neil, KN3ILZ On 3/4/2020 8:57 AM, Barry Green via

FWIW .... there aren't many 'original package bugs' .. but I agree, adding additional functionality when there's a third-party program that will do that, and more just adds complexity to an

Thanks to those of you who replied. I have investigated this option in HDSDR and using this you can solve the problem in a somewhat bizarre way. As you probably know when you swop the Rx I/Q

You can Enable Wanted Callsign Alert in JTAlert. 73, Herb WB8ASI