It appears to be working now. I had to go in and manually erase the existing files. Then when I started WSJTX with no wav files it deletes the new file after each receive period. Should

Thanks for the response. Yes I did receive a private email advising me. I thank you very much for responding though. 73 Darl NA8W

Hey Walter, Thanks but that is what I have done and they are still being saved. At least there is apparently a limit of 2611 files because the oldest is erased before the new one is

Hey Paul, Try clicking on the SAVE then select NONE. See if that takes care of it for you, as it does for me. Take care, Walter/K5WH

Yesterday I opened WSJT-X and had the same problem with no FT8 decodes. I checked my computer clock and it was a full 4 seconds ahead! After synchronization, everything is back to normal. I wonder if

How do I turn them off? I have gone to the SAVE menu and have NONE checked but the wav files continue to pile up in the save directory. Thanks Paul W5PF

I also use Windows Defender on the computer running wsjt-x. I set it not to scan wsjt-x's audio directory. Set your wsjt-x to save audio files. Then after awhile, like 5 minutes, you can play back

Hello, Thank you all for your responses, after handling, it works perfectly. thank you again, Alain Le 03/03/2020 à 20:03, Herb Blue a écrit :

Jim, Thank you. I use Windows Defender for Virus Protection. It has always been used on this computer. WSJT-X ran fine for about a year with no issues. This started in January sometime. It is Still a

Open the frequency window and right click where the freqs are missing. A popup will appear. Click Reset. 73, Herb WB8ASI

Good evening, and delighted to join you on this group. of the differents modes wsjt-x 2.1.2. with W7 pro 64bits, the frequency window in the "sittings" remains desperately empty. no frequency and no

Please leave the Tabs as they are. FT4 is not the only WSJT-X mode that shares this GUI. Kind regards, Kai, KE4PT

Hope I'm not in the wrong place to ask this: Is there an easy way to reset or create the adif log file? 73

Yes tried changing resolution several times - nothing works .. ALL other programs act normally including WSJT 10.0 and the waterfalls; WSJT-X 2.1.2 will not adjust smaller than 90% of my screen

I find that both are useful depending on the mode being used. Butch N5SMQ IMHO Tab 2 should just be eliminated. Perhaps some other functionality could be placed there. 73. Carl - WC4H

Darl, you may have found the answer, but I didn't see any response to your message. You are correct about the alternate F1 - F6 functions not being explained in the User Guide. In the WSJT-X main

Hi John, there's no definitive answer to your question. The FEC and a priori decoding algorithms can successfully extract a valid decode from portions of the original transmitted message, in fact in

>How much transmit delay will FT4 or FT8 accommodate? Another words, how late can I press the Enable Transmit button (assuming I have an accurate clock)? I'm thinking it would be a lot less for FT4

How much transmit delay will FT4 or FT8 accommodate? Another words, how late can I press the Enable Transmit button (assuming I have an accurate clock)? I'm thinking it would be a lot less for FT4

Steve, some users in the past have had their virus scanner cause that issue. It can occur when the virus scanner is scanning the audio file. I have my virus scanner set not to scan the wsjtx audio