Hi Bruce: Thanks for the info. I already had most of the settings as you suggested. I did refine some of them, but no help. Yes I have decodes on all the freq's that I operate on. The thing that

Do you have rig control to the 756? If you are on 7074 USB-D and select FT8 mode do you have decodes? Is the Blaster connected to the mic jack? For TX audio you have 4 points for levels, the Pwr

To: w8lvn The DB scale doesn't move even at 100 watts. On the radio I have the comp. set at 0 and the ALC just barely moves. I tried several contacts using 100 watts but still no answers. TNX,

When you are using FT8, does the DB bar at the lower left move at all? (Often, when I reboot my computer, I need to check my audio settings. But this may not be your issue, as you seem to be hearing

Additional info; Radio settings. Rig: none, PTT: RTS: checked, Poll: Inter: 1s, Com Port:3. Audio Input: mono, Speakers: mono. I run about 35-40 watts. on FT8 and on FT4-30 watts. The system has

Sorry. I'm running a IC-756 PRO 2. I have a RIG blaster Plus. As stated below everything was working correctly before this happened. I have not changed anything. FT4 works fine. I worked a few

The problem is your anti-virus software, not JTAlert. 73, Jim K9YC

I tried that, NOTHING changed. I mean the characters CQ, I can get the background line to change but the font color is not affected no matter if I try changing foreground or background color for CQ

File, Settings, Colors Tab.

I guess I must just assume it is a CQ in the BAND ACTIVITY because the CQ charters are almost unreadable., EXTRREMELY light and light green color that barely shows up. I cannot seem to find any way to

Sorry I will do without, not worth it to me, I can import my logs from WSJT-X, to my logging program it only takes a few seconds. -- Ryan, KC0QNB, DN90WW. Gothenburg, NE

He has left out the most important info and that is the complete setup including the radio and how it is connected to the PC. Also what are the menu settings in the radio and settings for the

Bill, Are you over-driving the transmitter, changed a setting or something? 73 Phil GM3ZZA Sent from Mail for Windows 10

An update on the problem with FT8. I uninstalled the program and checked to make sure there wasn't any hidden files. Restarted the computer and reinstalled the program. Still have the same problem.

If it is just a decode issue, you probably need to sync your clock to an NTP server. This can be done with Windows clock or other applications such as Meinberg, etc. There are a lot of messages on

Ryan, there are a number of ham radio apps, that my virus software complains about including jtalert. As long as you are downloading the software from the softwares main site, there is not any

Hi John give the dogwacth, more time so that the transmission is longer in time since it comes by default 6 minutes of transmission.- The longest may be about 20 minutes. regards 73 Edmundo CE2EC --

Thanks to everyone for their help. Irwin KD3TB -- Irwin KD3TB

From the FT8_DXpedition mode.pdf document: "You will need to re-activate Enable Tx (or hit Enter on the keyboard) at least once every two minutes. (This restriction is to ensure that an operator is

I do not use JTalert, there is a problem with their downloads according to my anti virus program. I looked and it would bridge between WSJT-X and my logger, but not worth the risk. This is when I