Augustine What mode are you using as this can have a big influence on the activity? FT4 and FT8 have in my mind killed off the other data and WS modes so only the die-hard supporters of those modes

Hi Augustine, do you have the WSJT-X option "Settings->General->Disable Tx after sending 73" checked? 73 Bill G4WJS.

I only seem to get a qso average 15min on average. After a while on 20m I keep seeing the same stations on the band no new stations. It can't be the antenna or my noise floor( its a S3 to S1). What do

No issues here in moving to Windoze 10. Only things to check are the ports used for CAT and audio connections. Charlie G4EST www.g4est.me.uk

After I send my signal report he send his and then mine sends again.

My Windows 7 computer is beginning to fail...it has met all my ft8 needs well and for some years... As I move to Windows 10, I think I’ve heard that installation issues sometimes arise. Any tips,

Chuck and Thomas, I believe the original problem of RR73 or RRR in FT4 and FT8 was linked to contest modes. In ordinary operation, if I close WSJT-X with FT4 as mode and RRR in Tx4, QSJT-X will open

So chuck, your saying that for example. If you leave the mode on FT4 with RRR on. Then close WSJT-X, then reopen it that it is still RRR??? If so that is AWESOME AWESOME NEWS, then I need to figure

Hello Martin, Yes, that isn't the problem. I think I maybe have worded the title wrong. Switching to RRR isn't the issue. The issue is that it doesn't save to your Config File? For example, Put yours

I use separate configurations for FT4 and FT8 (and for a variety of other modes) rather than switching modes within a single configuration, eg. the default one. I've just switched from my FT8 config

Did you get an RRR or an RR73 from the other station? The system will continue sending it until the other station acknowledges its receipt. Standard procedure, which is why

Hi Augustine, I assume that you are using Tab 1 for automatic message sequencing. I assume you mean message Tx 3 is repeated. That happens, if WSJT-X does not receive message Tx 4 containing either

How come WSJTX keeps sending roger signal report. Is has happen at least 5 times in one QSO. How can I fix it

Thomas, My point was that I made the RRR change in FT8 and that it stayed when I switched over to FT4. Try that. If it doesn’t work this problem is unique, because the change to RRR

Hello Chuck Adams, thanks for your reply. Yes I am aware of this. I mentioned in the message that I can double click on the Radio Button to change. The problem is, once you close WSJT-X and open it

Correction. Go to tab 1 and double click the circular radio button to the right of RR73 to toggle between RR73 and RRR. Sent from my T-Mobile 4G LTE Device

I just used FT4 and I have the RRR option enabled on my screen. Go to tab 1 and type RRR in place of RR73. 73, Chuck KV4VT Sent from my T-Mobile 4G LTE Device

Please note all the messages from groups I subscribe to are from Hamm apps in the sender. However the message content is correct from the proper group. Neil N4FN

Hello everyone, KJ4GK here. I am sure a lot of you guys have seen my call because I am a FT8 NUTT lol. It has became a Way of LIfe to me honestly ranking in with 24K Contacts since last June. I just

Progress report. Not sure why this seemed so hard almost 18 months ago. Using the Yaesu 857D, Yaesu CT62 cable and Tigertronics Signalink. Plugged the CT62 into the linear port on the 857D. Plugged