So, I've spent a while searching the FCC web... everyone knows what a pain it can be.., I'm going to drop the link here and point at a couple of sections, hopefully it will help clear this up. along

This, of course, is extremely good news! Thanks for the clarification.

Good afternoon I have an 857D which is set up like the 897D.  Do you happen to have an antenna tuner attached?  I have an LDG YT-100 and has a spare CAT port so that you can connect the tuner and

On 21/02/2020 20:23, Richard DeRose wrote: Richard, there are two sockets on the back of the FT-817/857/897(D) rigs. One for DATA AFSK audio and PTT, the other for CAT

Go here; https://www.tigertronics.com/pgmsetup.htm#WSJT-X John VE3KKQ

Sounds like Monty Python: https://www.youtube.com/watch?v=jYcPBE5PXhs

The signial link is connected to the data on the radio No place left to connect the computer to. Richard DeRose 561-441-6376 102 Blackjack Lane Burleson, Texas 76028 KG5FNS Life's journey is not to

So if I tune my radio to channel 3 @5357.0 mhz with a center frequency of 5358.5 mhz using FT8 . The FT8 modulation scheme is 8-FSK i.e. an 8-bit transmission using 8 different

We haven’t petitioned the FCC and NTIA, AFAIK. (but I can verify that) 73 Ria, N2RJ

Earlier this week I announced that Tom Morrison, K5TM, had passed away. Fortunately he is still alive and well and my announcement was in error. I just heard from him today. I apologized to him and

Thank you, Ria, for your informed response! In your related e-mail you state: “Some countries do not have channelization on 60m. In 9Y I can use 1.5kw from 5.25 to 5.45MHz without restriction.

Hi Mike: My name is Tom and my call is N8TL. I wanted to pass along to you some information that you might not be aware of. The previous owner of the W8DN call sign was Russell Flora

I used the band once or twice, for a MARS exercise, on phone. I don't think FT8 is really compatible with the very unclear regulations on that band. Don't look me up there. There is plenty of room

You have to add a connection between your rig’s CAT control and the computer. The SignaLink provides audio and PTT connections only. It does not include any interface for rig control (frequency,

The SignaLink does not have any connection for radio control. It is only a sound card for audio plus a PTT signal derived from the audio. You need a separate connection for radio control. In the case

Signalink does nothing more than provide the audio component for digital modes. To read the frequency and/or control your radio will require CAT connection and appropriate interface.

Gary - K7EK: In the interest of improving our knowledge of 60M operation, can you tell us the nature of the communications you are involved in from the government station? Who do you communicate with

I am using a PC with Windows 10 and WSJTX connected to a ft897 through a signal link. I cannot get the computer to connect to get the frequency. What settings are required.? Dick

The source code is open, and many will just reverse engineer and disable this. Not everyone uses WSJTX for FT8 anyway. Not many of the full auto robot guys. They use their own software like MSHV or

I’m not aware of any complaints by the NTIA against radio amateurs for using FT8 on 60m. The volunteer monitor program nor the FCC are sending out violation notices. I keep abreast of enforcement