I do have a few nice photos for the QST article but could use more. High resolution photos get published in the magazine! Please email photos to me directly. (I can still take stories too, if you

Try mini PC DELL OPTIPLEX 7050 INTEL CORE I7-6700T/SSD 256GB/16GB DDR4 and Win10.It work very well and is not expensive 73 de Ovi

Under settings frequency then right click nothing happens Scott K9SM

Don, were you thinking of Tom V Morton, N4LCH, who passed in January of this year?

Yeah, I run JTDX and cqrlog on a $40 Raspberry Pi with no problems. I've worked 48 states and 51 countries since September using an indoor mag loop antenna (deed restrictions on outdoor antennas). --

In Vietnam I was limited to 3500 to 3520. 73, Larry W6NWS On 2/19/2020 9:47 AM, Gary E. Kohtala via Groups.Io wrote:

Don, K5TM is Thomas Morrison, not Morton. K5TM was my contest mentor in Austin TX in the late 70s. I do know that Tom lived in the Austin area until a couple of yrs ago & then moved to SC. Are you

I believe that they are limited to 3500-3550 over there. At least that's what I remember from my exploits as HL9TG during my military career. Propagation has been good. I have copied numerous Japanese

I frequently see South Korea spotted on 3547 as a base frequency. Is this due to spectrum allocation in that country? Are other Asian countries similarly affected? Thanks Jim ab3cv

On Wed, Feb 19, 2020 at 12:14 AM, George J Molnar wrote: KB2GCG is correct about Windows 7.

On 2/19/20 5:11 AM, Bill Somerville wrote: Hi, Bill: Thanks. I think this needs its own thread. :-| What is not quoted here was a nice review, but what caught my

On 19/02/2020 09:44, Nc8q-mesh@... wrote: Chuck, there's no surprise here and nothing particularly useful either other than the 2 second metric. The FT8 decoder will spread a

On 2/18/20 4:49 PM, s@... wrote: On 40 meters, DEEP decoding about 10 stations per 15 seconds, running RPi4-2G dual monitors to an IC-7300. top -d 2 is reporting 75-99% CPU

My neighbor W6GJB just bought his second NUC. One thing he learned is that those with lower-power processors will run on 12VDC, which allows them to run off of the low noise 12-14VDC bus in our shack.

I certainly agree, and those are some of the ports I was talking about that I add with a docking station. They can also add video outputs in several output formats. 73, Jim K9YC

Thanks Hasan, IIRC, I've seen WSJT-X decode outside my waterfall. Obviously if the rig's filter is less than 3k then that restricts what would get decoded. 73 Phil GM3ZZA

Radio is ic-7300, running win 10

Got visited by Apple last night and now I have this problem. Under SETTINGS, AUDIO, the window that should show INPUT is blank and stays blank when I try to select codex or any other sound device.

One thing I think no-one has mentioned is the number of USB ports. In my experience, you can't have too many of those. While some low data throughput devices (such as USB-to-serial adapters) are fine

Did you RIGHT CLICK in the Frequency List to get the menu ?? Neil, KN3ILZ On 2/17/2020 1:45 PM, Scott Millick wrote: